From ole.gamnes.news at c2i.net Tue Jul 3 11:45:11 2007 From: ole.gamnes.news at c2i.net (Ole) Date: Tue, 3 Jul 2007 20:45:11 +0200 Subject: [NM] Problem with NM1 and Cubase References: <380B3883-928E-4751-BF7D-53E968CC0E2D@3phase.de> Message-ID: <002c01c7bda2$49b68b00$0200a8c0@KONTOR> Hi, (my first message to the list). I've bought a NM Classic and created a patch that I am controlling from Cubase. Everything works well recording in Cubase and replaying through Cubase untill I press "Stop" after that my NM turns several octaves down in pitch ! It will only play properly after I turn the synth off and back on again. However, the same thing happens when I hit "stop" in my sequencer and try to play again. Do anyone have a clue to what might be wrong in my setup? best regards ole From clkdiv at yahoo.de Tue Jul 3 14:51:05 2007 From: clkdiv at yahoo.de (Martin Hoppe) Date: Tue, 3 Jul 2007 23:51:05 +0200 Subject: [NM] Problem with NM1 and Cubase In-Reply-To: <002c01c7bda2$49b68b00$0200a8c0@KONTOR> Message-ID: <200707032151.l63Lp427003410@srv1.electro-music.com> I am almost sure that happens because Cubase is sending a midi controller value at stop. Make sure, your patch does not have any controllers assigned (use the F9-key to see the assigned midi controllers) then try again. Good luck... -----Urspr?ngliche Nachricht----- Von: nord-modular-bounces at electro-music.com [mailto:nord-modular-bounces at electro-music.com] Im Auftrag von Ole Gesendet: Dienstag, 3. Juli 2007 20:45 An: Nord Modular mailing list Betreff: [NM] Problem with NM1 and Cubase Hi, (my first message to the list). I've bought a NM Classic and created a patch that I am controlling from Cubase. Everything works well recording in Cubase and replaying through Cubase untill I press "Stop" after that my NM turns several octaves down in pitch ! It will only play properly after I turn the synth off and back on again. However, the same thing happens when I hit "stop" in my sequencer and try to play again. Do anyone have a clue to what might be wrong in my setup? best regards ole ___________________________________________________________ Nord-modular mailing list Nord-modular at electro-music.com http://mail.electro-music.com/mailman/listinfo/nord-modular Members: use http://mail.electro-music.com/mailman/options/nord-modular to change subscription status, digest options, password, topics, etc. Patches sent to the Nord-Modular mailing list may not be redistributed without the express consent of the author/creator. ___________________________________________________________ From chillymitchy at gmail.com Tue Jul 3 15:06:57 2007 From: chillymitchy at gmail.com (Chilly Mitchy) Date: Wed, 4 Jul 2007 00:06:57 +0200 Subject: [NM] Problem with NM1 and Cubase In-Reply-To: <200707032151.l63Lp427003410@srv1.electro-music.com> References: <200707032151.l63Lp427003410@srv1.electro-music.com> Message-ID: <0dd146bdb1f282ebcfd202b79ed14d67@gmail.com> I'm not using cubase, but could it be that the track that's controlling the G2 is set on a fixed transpose ? Try pressing "shift" and the 'global' "Octave Shift" at the same time ? Maybe that helps ? Good luck ! On Jul 3, 2007, at 11:51 PM, Martin Hoppe wrote: > I am almost sure that happens because Cubase is sending a midi > controller > value at stop. Make sure, your patch does not have any controllers > assigned > (use the F9-key to see the assigned midi controllers) then try again. > Good > luck... > > -----Urspr?ngliche Nachricht----- > Von: nord-modular-bounces at electro-music.com > [mailto:nord-modular-bounces at electro-music.com] Im Auftrag von Ole > Gesendet: Dienstag, 3. Juli 2007 20:45 > An: Nord Modular mailing list > Betreff: [NM] Problem with NM1 and Cubase > > Hi, > (my first message to the list). > > I've bought a NM Classic and created a patch that I am controlling from > Cubase. Everything works well recording in Cubase and replaying through > Cubase untill I press "Stop" after that my NM turns several octaves > down in > pitch ! It will only play properly after I turn the synth off and back > on > again. However, the same thing happens when I hit "stop" in my > sequencer and > try to play again. Do anyone have a clue to what might be wrong in my > setup? > > best regards > ole > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord-modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ > > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord-modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ > > http://www.myspace.com/descargaelectrica From sonic.kitchen at gmail.com Tue Jul 3 16:17:16 2007 From: sonic.kitchen at gmail.com (Sonic Kooking) Date: Wed, 4 Jul 2007 01:17:16 +0200 Subject: [NM] Nord Modular and Max Message-ID: hallo, i don't get it, i've tried the get control number from the knobs on my nord modular in max, but nothing happens appears. must i set the modular controls to external? thanks dennis From sonic.kitchen at gmail.com Tue Jul 3 16:18:03 2007 From: sonic.kitchen at gmail.com (Sonic Kooking) Date: Wed, 4 Jul 2007 01:18:03 +0200 Subject: [NM] Nord Modular and Max Message-ID: <27D037B4-0CAC-44C6-9DBE-A5412E78FE48@gmail.com> hallo, sorry i forgot to include, nord modular keys and mac g4, maxmsp 4.63, os.10.4.9 thanks dennis From chillymitchy at gmail.com Tue Jul 3 16:20:03 2007 From: chillymitchy at gmail.com (Chilly Mitchy) Date: Wed, 4 Jul 2007 01:20:03 +0200 Subject: [NM] Nord Modular and Max In-Reply-To: <27D037B4-0CAC-44C6-9DBE-A5412E78FE48@gmail.com> References: <27D037B4-0CAC-44C6-9DBE-A5412E78FE48@gmail.com> Message-ID: <8018ab1553435ad5a004ffdb49aa08eb@gmail.com> Did u assign the knob to a cc# ? On Jul 4, 2007, at 1:18 AM, Sonic Kooking wrote: > > hallo, > > sorry i forgot to include, nord modular keys and mac g4, maxmsp 4.63, > os.10.4.9 > > thanks > dennis > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord-modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ > > http://www.myspace.com/descargaelectrica From sonic.kitchen at gmail.com Tue Jul 3 16:54:32 2007 From: sonic.kitchen at gmail.com (Sonic Kooking) Date: Wed, 4 Jul 2007 01:54:32 +0200 Subject: [NM] Nord Modular and Max In-Reply-To: <8018ab1553435ad5a004ffdb49aa08eb@gmail.com> References: <27D037B4-0CAC-44C6-9DBE-A5412E78FE48@gmail.com> <8018ab1553435ad5a004ffdb49aa08eb@gmail.com> Message-ID: <69868BC3-7FA6-43F2-92D6-E14DBEE325B1@gmail.com> hi no, i will try it out and report soon. dennis Am 04.07.2007 um 01:20 schrieb Chilly Mitchy: > Did u assign the knob to a cc# ? > On Jul 4, 2007, at 1:18 AM, Sonic Kooking wrote: > >> >> hallo, >> >> sorry i forgot to include, nord modular keys and mac g4, maxmsp 4.63, >> os.10.4.9 >> >> thanks >> dennis >> ___________________________________________________________ >> Nord-modular mailing list >> Nord-modular at electro-music.com >> http://mail.electro-music.com/mailman/listinfo/nord-modular >> >> Members: use http://mail.electro-music.com/mailman/options/nord- >> modular >> to change subscription status, digest options, password, topics, etc. >> >> Patches sent to the Nord-Modular mailing list may not be >> redistributed >> without the express consent of the author/creator. >> ___________________________________________________________ >> >> > http://www.myspace.com/descargaelectrica > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord- > modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ From sberweck at gmx.de Wed Jul 4 03:42:48 2007 From: sberweck at gmx.de (Sebastian Berweck) Date: Wed, 4 Jul 2007 12:42:48 +0200 Subject: [NM] Nord Modular and Max In-Reply-To: <69868BC3-7FA6-43F2-92D6-E14DBEE325B1@gmail.com> Message-ID: <200707041041.l64AfdiE018095@srv1.electro-music.com> And don't forget to check the MIDI settings in the Synth settings menu. -----Urspr?ngliche Nachricht----- Von: nord-modular-bounces at electro-music.com [mailto:nord-modular-bounces at electro-music.com] Im Auftrag von Sonic Kooking Gesendet: Mittwoch, 4. Juli 2007 01:55 An: Nord Modular mailing list Betreff: Re: [NM] Nord Modular and Max hi no, i will try it out and report soon. dennis Am 04.07.2007 um 01:20 schrieb Chilly Mitchy: > Did u assign the knob to a cc# ? > On Jul 4, 2007, at 1:18 AM, Sonic Kooking wrote: > >> >> hallo, >> >> sorry i forgot to include, nord modular keys and mac g4, maxmsp 4.63, >> os.10.4.9 >> >> thanks >> dennis >> ___________________________________________________________ >> Nord-modular mailing list >> Nord-modular at electro-music.com >> http://mail.electro-music.com/mailman/listinfo/nord-modular >> >> Members: use http://mail.electro-music.com/mailman/options/nord- >> modular >> to change subscription status, digest options, password, topics, etc. >> >> Patches sent to the Nord-Modular mailing list may not be >> redistributed without the express consent of the author/creator. >> ___________________________________________________________ >> >> > http://www.myspace.com/descargaelectrica > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord- > modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ ___________________________________________________________ Nord-modular mailing list Nord-modular at electro-music.com http://mail.electro-music.com/mailman/listinfo/nord-modular Members: use http://mail.electro-music.com/mailman/options/nord-modular to change subscription status, digest options, password, topics, etc. Patches sent to the Nord-Modular mailing list may not be redistributed without the express consent of the author/creator. ___________________________________________________________ From sonic.kitchen at gmail.com Wed Jul 4 05:40:22 2007 From: sonic.kitchen at gmail.com (Sonic Kooking) Date: Wed, 4 Jul 2007 14:40:22 +0200 Subject: [NM] Nord Modular and Max In-Reply-To: <200707041041.l64AfdiE018095@srv1.electro-music.com> References: <200707041041.l64AfdiE018095@srv1.electro-music.com> Message-ID: <09564DBA-2F6F-4C97-8B76-E91035EF2F4F@gmail.com> hi you mean the midi channels? i've not tried it out yet, as i've to finished up a project soon. but what i've tried in max using ctrlin, notein. I receive notein but not ctrlin. port and channel is the right one. dennis Am 04.07.2007 um 12:42 schrieb Sebastian Berweck: > And don't forget to check the MIDI settings in the Synth settings > menu. > > -----Urspr?ngliche Nachricht----- > Von: nord-modular-bounces at electro-music.com > [mailto:nord-modular-bounces at electro-music.com] Im Auftrag von > Sonic Kooking > Gesendet: Mittwoch, 4. Juli 2007 01:55 > An: Nord Modular mailing list > Betreff: Re: [NM] Nord Modular and Max > > hi > > no, i will try it out and report soon. > > dennis > Am 04.07.2007 um 01:20 schrieb Chilly Mitchy: > >> Did u assign the knob to a cc# ? >> On Jul 4, 2007, at 1:18 AM, Sonic Kooking wrote: >> >>> >>> hallo, >>> >>> sorry i forgot to include, nord modular keys and mac g4, maxmsp >>> 4.63, >>> os.10.4.9 >>> >>> thanks >>> dennis >>> ___________________________________________________________ >>> Nord-modular mailing list >>> Nord-modular at electro-music.com >>> http://mail.electro-music.com/mailman/listinfo/nord-modular >>> >>> Members: use http://mail.electro-music.com/mailman/options/nord- >>> modular >>> to change subscription status, digest options, password, topics, >>> etc. >>> >>> Patches sent to the Nord-Modular mailing list may not be >>> redistributed without the express consent of the author/creator. >>> ___________________________________________________________ >>> >>> >> http://www.myspace.com/descargaelectrica >> >> ___________________________________________________________ >> Nord-modular mailing list >> Nord-modular at electro-music.com >> http://mail.electro-music.com/mailman/listinfo/nord-modular >> >> Members: use http://mail.electro-music.com/mailman/options/nord- >> modular >> to change subscription status, digest options, password, topics, etc. >> >> Patches sent to the Nord-Modular mailing list may not be >> redistributed >> without the express consent of the author/creator. >> ___________________________________________________________ > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord- > modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ > > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord- > modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ From sberweck at gmx.de Wed Jul 4 06:40:22 2007 From: sberweck at gmx.de (Sebastian Berweck) Date: Wed, 4 Jul 2007 15:40:22 +0200 Subject: [NM] Nord Modular and Max In-Reply-To: <09564DBA-2F6F-4C97-8B76-E91035EF2F4F@gmail.com> Message-ID: <200707041339.l64DdEk0021717@srv1.electro-music.com> Yes, the MIDI channels and if they're active or not. But I guess they're already active since you receive notein. -----Urspr?ngliche Nachricht----- Von: nord-modular-bounces at electro-music.com [mailto:nord-modular-bounces at electro-music.com] Im Auftrag von Sonic Kooking Gesendet: Mittwoch, 4. Juli 2007 14:40 An: Nord Modular mailing list Betreff: Re: [NM] Nord Modular and Max hi you mean the midi channels? i've not tried it out yet, as i've to finished up a project soon. but what i've tried in max using ctrlin, notein. I receive notein but not ctrlin. port and channel is the right one. dennis Am 04.07.2007 um 12:42 schrieb Sebastian Berweck: > And don't forget to check the MIDI settings in the Synth settings > menu. > > -----Urspr?ngliche Nachricht----- > Von: nord-modular-bounces at electro-music.com > [mailto:nord-modular-bounces at electro-music.com] Im Auftrag von Sonic > Kooking > Gesendet: Mittwoch, 4. Juli 2007 01:55 > An: Nord Modular mailing list > Betreff: Re: [NM] Nord Modular and Max > > hi > > no, i will try it out and report soon. > > dennis > Am 04.07.2007 um 01:20 schrieb Chilly Mitchy: > >> Did u assign the knob to a cc# ? >> On Jul 4, 2007, at 1:18 AM, Sonic Kooking wrote: >> >>> >>> hallo, >>> >>> sorry i forgot to include, nord modular keys and mac g4, maxmsp >>> 4.63, >>> os.10.4.9 >>> >>> thanks >>> dennis >>> ___________________________________________________________ >>> Nord-modular mailing list >>> Nord-modular at electro-music.com >>> http://mail.electro-music.com/mailman/listinfo/nord-modular >>> >>> Members: use http://mail.electro-music.com/mailman/options/nord- >>> modular >>> to change subscription status, digest options, password, topics, >>> etc. >>> >>> Patches sent to the Nord-Modular mailing list may not be >>> redistributed without the express consent of the author/creator. >>> ___________________________________________________________ >>> >>> >> http://www.myspace.com/descargaelectrica >> >> ___________________________________________________________ >> Nord-modular mailing list >> Nord-modular at electro-music.com >> http://mail.electro-music.com/mailman/listinfo/nord-modular >> >> Members: use http://mail.electro-music.com/mailman/options/nord- >> modular >> to change subscription status, digest options, password, topics, etc. >> >> Patches sent to the Nord-Modular mailing list may not be >> redistributed without the express consent of the author/creator. >> ___________________________________________________________ > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord- > modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ > > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord- > modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ ___________________________________________________________ Nord-modular mailing list Nord-modular at electro-music.com http://mail.electro-music.com/mailman/listinfo/nord-modular Members: use http://mail.electro-music.com/mailman/options/nord-modular to change subscription status, digest options, password, topics, etc. Patches sent to the Nord-Modular mailing list may not be redistributed without the express consent of the author/creator. ___________________________________________________________ From ole.gamnes.news at c2i.net Thu Jul 5 09:40:45 2007 From: ole.gamnes.news at c2i.net (Ole) Date: Thu, 5 Jul 2007 18:40:45 +0200 Subject: [NM] Problem with NM1 and Cubase References: <200707032151.l63Lp427003410@srv1.electro-music.com> Message-ID: <006301c7bf23$3c0639b0$0200a8c0@KONTOR> Hi Martin, You were right. I had a patch where the footpedal controlled the pitch via one of the morphgroups. Somehow this is reset(?) everytime cubase was stopped somehow and the pitch went down really low. Thanks. ole NMG1, cubase5 and MacOS9.2 ----- Original Message ----- From: "Martin Hoppe" To: "'Nord Modular mailing list'" Sent: Tuesday, July 03, 2007 11:51 PM Subject: Re: [NM] Problem with NM1 and Cubase I am almost sure that happens because Cubase is sending a midi controller value at stop. Make sure, your patch does not have any controllers assigned (use the F9-key to see the assigned midi controllers) then try again. Good luck... -----Urspr?ngliche Nachricht----- Von: nord-modular-bounces at electro-music.com [mailto:nord-modular-bounces at electro-music.com] Im Auftrag von Ole Gesendet: Dienstag, 3. Juli 2007 20:45 An: Nord Modular mailing list Betreff: [NM] Problem with NM1 and Cubase Hi, (my first message to the list). I've bought a NM Classic and created a patch that I am controlling from Cubase. Everything works well recording in Cubase and replaying through Cubase untill I press "Stop" after that my NM turns several octaves down in pitch ! It will only play properly after I turn the synth off and back on again. However, the same thing happens when I hit "stop" in my sequencer and try to play again. Do anyone have a clue to what might be wrong in my setup? best regards ole ___________________________________________________________ Nord-modular mailing list Nord-modular at electro-music.com http://mail.electro-music.com/mailman/listinfo/nord-modular Members: use http://mail.electro-music.com/mailman/options/nord-modular to change subscription status, digest options, password, topics, etc. Patches sent to the Nord-Modular mailing list may not be redistributed without the express consent of the author/creator. ___________________________________________________________ ___________________________________________________________ Nord-modular mailing list Nord-modular at electro-music.com http://mail.electro-music.com/mailman/listinfo/nord-modular Members: use http://mail.electro-music.com/mailman/options/nord-modular to change subscription status, digest options, password, topics, etc. Patches sent to the Nord-Modular mailing list may not be redistributed without the express consent of the author/creator. ___________________________________________________________ From matfhew.carpenfer at gmail.com Fri Jul 6 12:22:47 2007 From: matfhew.carpenfer at gmail.com (matthew carpenter) Date: Fri, 6 Jul 2007 15:22:47 -0400 Subject: [NM] WTB: Nord G2 Engine and Nord Modular Rack Message-ID: <534d0e850707061222t4d449cacwaad6818dd0e0e817@mail.gmail.com> Please contact me if you have either for sale in excellent condition and can accept PayPal. I have many references. Thanks! Matt -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070706/399ee67b/attachment.html From h at mosc.com Wed Jul 11 13:08:31 2007 From: h at mosc.com (Howard Moscovitz) Date: Wed, 11 Jul 2007 16:08:31 -0400 Subject: [NM] email problems with list Message-ID: <469538BF.1020806@mosc.com> There have lately been some technical issues with the electro-music.com DNS services that may have caused this email list to not be working. I think the problem is resolved now. If you get this, it is. There may be some messages to the list that didn't make it, and may never get through. If you sent such a message in the last few days that hasn't been reflected to the list, please resend it. Sorry for the inconvenience. Howard From h at mosc.com Wed Jul 11 13:17:50 2007 From: h at mosc.com (Howard Moscovitz) Date: Wed, 11 Jul 2007 16:17:50 -0400 Subject: [NM] My G2 on myspace In-Reply-To: <002201c79d71$0b5e1950$0200a8c0@perf0445911f6c> References: <002201c79d71$0b5e1950$0200a8c0@perf0445911f6c> Message-ID: <46953AEE.50906@mosc.com> Thanks for the link, Per. Great music. --Howard Per Wikstr?m wrote: > Hi folks, > On www.myspace.com/ratstudiossoutheast > there are some pictures and > music samples of my G2 controlled virtual/real analogue modular. It is > open since some hours only, but hope to use it as a synth blog for this > project. From controlvoltage at gmail.com Fri Jul 13 09:51:58 2007 From: controlvoltage at gmail.com (Amos) Date: Fri, 13 Jul 2007 12:51:58 -0400 Subject: [NM] Please help me to edit my NM1 Message-ID: <908a4c120707130951v11462bcfo114008e959780d38@mail.gmail.com> Hello, I have owned a NM1 rack for some time, but I have never been able to get the editor to recognize it. I use winXP (SP2) which I gather is not very good at running the Nord Modular editor 3.03 from Clavia. I have tried the open source editor just today and it does connect to the Nord, but I gather that not all modules are supported by the open-source editor. This is very frustrating! Does anyone have some suggestions about compatibility settings or other technomagic I could try to get the official editor to work? I am aching to program this synth... also, if anyone with experience in using the open-source editor could tell me precisely what it is missing and how much of a problem that is for creating patches, I am very curious to know more. Thank you very much! -Amos -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070713/173d12c2/attachment.html From matfhew.carpenfer at gmail.com Fri Jul 13 09:55:25 2007 From: matfhew.carpenfer at gmail.com (matthew carpenter) Date: Fri, 13 Jul 2007 12:55:25 -0400 Subject: [NM] Please help me to edit my NM1 In-Reply-To: <908a4c120707130951v11462bcfo114008e959780d38@mail.gmail.com> References: <908a4c120707130951v11462bcfo114008e959780d38@mail.gmail.com> Message-ID: <534d0e850707130955x9b49b82l651ca3bcc0c4b117@mail.gmail.com> It's really easy. Right-click the shortcut to the NM Editor and go to the Compatibility tab and set the compatibility to Windows 98 and click OK. Should work then. This comes up ALL the time. On 7/13/07, Amos wrote: > > Hello, > > I have owned a NM1 rack for some time, but I have never been able to get > the editor to recognize it. I use winXP (SP2) which I gather is not very > good at running the Nord Modular editor 3.03 from Clavia. I have tried > the open source editor just today and it does connect to the Nord, but I > gather that not all modules are supported by the open-source editor. This > is very frustrating! Does anyone have some suggestions about compatibility > settings or other technomagic I could try to get the official editor to > work? I am aching to program this synth... also, if anyone with experience > in using the open-source editor could tell me precisely what it is missing > and how much of a problem that is for creating patches, I am very curious to > know more. Thank you very much! > > -Amos > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord-modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070713/8a76e196/attachment.html From m.sulmona at wanadoo.fr Fri Jul 13 10:56:43 2007 From: m.sulmona at wanadoo.fr (m.sulmona) Date: Fri, 13 Jul 2007 19:56:43 +0200 Subject: [NM] Please help me to edit my NM1 References: <908a4c120707130951v11462bcfo114008e959780d38@mail.gmail.com> <534d0e850707130955x9b49b82l651ca3bcc0c4b117@mail.gmail.com> Message-ID: <002001c7c577$2c59c810$d73b7b52@allez> Fantastic... I had the same problem and was too ashamed to ask... THANX A LOT !!!! ----- Original Message ----- From: matthew carpenter To: Nord Modular mailing list Sent: Friday, July 13, 2007 6:55 PM Subject: Re: [NM] Please help me to edit my NM1 It's really easy. Right-click the shortcut to the NM Editor and go to the Compatibility tab and set the compatibility to Windows 98 and click OK. Should work then. This comes up ALL the time. On 7/13/07, Amos wrote: Hello, I have owned a NM1 rack for some time, but I have never been able to get the editor to recognize it. I use winXP (SP2) which I gather is not very good at running the Nord Modular editor 3.03 from Clavia. I have tried the open source editor just today and it does connect to the Nord, but I gather that not all modules are supported by the open-source editor. This is very frustrating! Does anyone have some suggestions about compatibility settings or other technomagic I could try to get the official editor to work? I am aching to program this synth... also, if anyone with experience in using the open-source editor could tell me precisely what it is missing and how much of a problem that is for creating patches, I am very curious to know more. Thank you very much! -Amos ___________________________________________________________ Nord-modular mailing list Nord-modular at electro-music.com http://mail.electro-music.com/mailman/listinfo/nord-modular Members: use http://mail.electro-music.com/mailman/options/nord-modular to change subscription status, digest options, password, topics, etc. Patches sent to the Nord-Modular mailing list may not be redistributed without the express consent of the author/creator. ___________________________________________________________ ------------------------------------------------------------------------------ ___________________________________________________________ Nord-modular mailing list Nord-modular at electro-music.com http://mail.electro-music.com/mailman/listinfo/nord-modular Members: use http://mail.electro-music.com/mailman/options/nord-modular to change subscription status, digest options, password, topics, etc. Patches sent to the Nord-Modular mailing list may not be redistributed without the express consent of the author/creator. ___________________________________________________________ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070713/3150cb7b/attachment.html From matfhew.carpenfer at gmail.com Fri Jul 13 12:07:20 2007 From: matfhew.carpenfer at gmail.com (matthew carpenter) Date: Fri, 13 Jul 2007 15:07:20 -0400 Subject: [NM] Please help me to edit my NM1 In-Reply-To: <002001c7c577$2c59c810$d73b7b52@allez> References: <908a4c120707130951v11462bcfo114008e959780d38@mail.gmail.com> <534d0e850707130955x9b49b82l651ca3bcc0c4b117@mail.gmail.com> <002001c7c577$2c59c810$d73b7b52@allez> Message-ID: <534d0e850707131207v77ddc604ufb6c4f8167373d18@mail.gmail.com> Glad to help! Patch on! On 7/13/07, m.sulmona wrote: > > Fantastic... > I had the same problem and was too ashamed to ask... > > THANX A LOT !!!! > > ----- Original Message ----- > *From:* matthew carpenter > *To:* Nord Modular mailing list > *Sent:* Friday, July 13, 2007 6:55 PM > *Subject:* Re: [NM] Please help me to edit my NM1 > > It's really easy. Right-click the shortcut to the NM Editor and go to the > Compatibility tab and set the compatibility to Windows 98 and click OK. > Should work then. This comes up ALL the time. > > On 7/13/07, Amos wrote: > > > > Hello, > > > > I have owned a NM1 rack for some time, but I have never been able to get > > the editor to recognize it. I use winXP (SP2) which I gather is not very > > good at running the Nord Modular editor 3.03 from Clavia. I have tried > > the open source editor just today and it does connect to the Nord, but I > > gather that not all modules are supported by the open-source editor. This > > is very frustrating! Does anyone have some suggestions about compatibility > > settings or other technomagic I could try to get the official editor to > > work? I am aching to program this synth... also, if anyone with experience > > in using the open-source editor could tell me precisely what it is missing > > and how much of a problem that is for creating patches, I am very curious to > > know more. Thank you very much! > > > > -Amos > > > > ___________________________________________________________ > > Nord-modular mailing list > > Nord-modular at electro-music.com > > http://mail.electro-music.com/mailman/listinfo/nord-modular > > > > Members: use http://mail.electro-music.com/mailman/options/nord-modular > > to change subscription status, digest options, password, topics, etc. > > > > Patches sent to the Nord-Modular mailing list may not be redistributed > > without the express consent of the author/creator. > > ___________________________________________________________ > > > > > ------------------------------ > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord-modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ > > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord-modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070713/77a51fcd/attachment.html From blommoo at wanadoo.nl Fri Jul 13 23:30:18 2007 From: blommoo at wanadoo.nl (Wm Blommers) Date: Sat, 14 Jul 2007 08:30:18 +0200 (CEST) Subject: [NM] Please help me to edit my NM1 Message-ID: <26235846.2765061184394618830.JavaMail.www@wwinf6001> Hi, On the user site, with an overdosis of information about the Nord Modular Classic, there is a FAQ: http://nm-archives.electro-music.com/010_NordModular/018_FAQ/ Wout -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070714/6f875e93/attachment.html From matfhew.carpenfer at gmail.com Sat Jul 14 09:13:28 2007 From: matfhew.carpenfer at gmail.com (matthew carpenter) Date: Sat, 14 Jul 2007 12:13:28 -0400 Subject: [NM] NM: 12 kHz Elliptical Filter Message-ID: <534d0e850707140913t6368342bw53cfa710e08f94a5@mail.gmail.com> Dave (Peck), Would you or anyone else with this .pch mind posting it to the list, again? I receive a File Not Found error when attempting to download it from the message in the list archives and I can't find it in the Patch archives. This is the patch that removes the 12 kHz hash in some NM Classic patches and can 'warm' the sound. Thanks! Matt -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070714/69f45ded/attachment.html From j.punter at iaf.nl Sat Jul 14 12:23:57 2007 From: j.punter at iaf.nl (Jan Punter) Date: Sat, 14 Jul 2007 21:23:57 +0200 Subject: [NM] NM: 12 kHz Elliptical Filter In-Reply-To: <534d0e850707140913t6368342bw53cfa710e08f94a5@mail.gmail.com> References: <534d0e850707140913t6368342bw53cfa710e08f94a5@mail.gmail.com> Message-ID: <1184441037.469922cdc223a@webmail.iaf.nl> Quoting matthew carpenter : > Would you or anyone else with this .pch mind posting it to the list, again? Do you know the name of the patch and/or who made it? -- Jan. From matfhew.carpenfer at gmail.com Sat Jul 14 12:37:17 2007 From: matfhew.carpenfer at gmail.com (matthew carpenter) Date: Sat, 14 Jul 2007 15:37:17 -0400 Subject: [NM] NM: 12 kHz Elliptical Filter In-Reply-To: <1184441037.469922cdc223a@webmail.iaf.nl> References: <534d0e850707140913t6368342bw53cfa710e08f94a5@mail.gmail.com> <1184441037.469922cdc223a@webmail.iaf.nl> Message-ID: <534d0e850707141237x1f246084p3901f0d280ad58f2@mail.gmail.com> Yes, Dave Peck made it and it was called Warmth something. The message was posted in late June, 2005. On 7/14/07, Jan Punter wrote: > > Quoting matthew carpenter : > > > Would you or anyone else with this .pch mind posting it to the list, > again? > > Do you know the name of the patch and/or who made it? > > -- > Jan. > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord-modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070714/abea59a8/attachment.html From j.punter at iaf.nl Sat Jul 14 12:49:28 2007 From: j.punter at iaf.nl (Jan Punter) Date: Sat, 14 Jul 2007 21:49:28 +0200 Subject: [NM] NM: 12 kHz Elliptical Filter In-Reply-To: <534d0e850707141237x1f246084p3901f0d280ad58f2@mail.gmail.com> References: <534d0e850707140913t6368342bw53cfa710e08f94a5@mail.gmail.com> <1184441037.469922cdc223a@webmail.iaf.nl> <534d0e850707141237x1f246084p3901f0d280ad58f2@mail.gmail.com> Message-ID: <1184442568.469928c80727d@webmail.iaf.nl> Quoting matthew carpenter : > Yes, Dave Peck made it and it was called Warmth something. The message was > posted in late June, 2005. I have "Warmth examples" made by Dave, but it's dated 2003-06-24, I'll attach it so you can have a look. It does have an elliptical filter in the left column. I've got another patch made by Dave called "warmth Idea", but that one has no elliptical filter. -- Jan. -------------- next part -------------- A non-text attachment was scrubbed... Name: warmth examples.pch Type: application/nord-modular-patch Size: 1976 bytes Desc: not available Url : http://mail.electro-music.com/pipermail/nord-modular/attachments/20070714/3041ccfe/attachment.bin From matfhew.carpenfer at gmail.com Sat Jul 14 12:55:29 2007 From: matfhew.carpenfer at gmail.com (matthew carpenter) Date: Sat, 14 Jul 2007 15:55:29 -0400 Subject: [NM] NM: 12 kHz Elliptical Filter In-Reply-To: <1184442568.469928c80727d@webmail.iaf.nl> References: <534d0e850707140913t6368342bw53cfa710e08f94a5@mail.gmail.com> <1184441037.469922cdc223a@webmail.iaf.nl> <534d0e850707141237x1f246084p3901f0d280ad58f2@mail.gmail.com> <1184442568.469928c80727d@webmail.iaf.nl> Message-ID: <534d0e850707141255x2d75a866o71b4f6fa080699bd@mail.gmail.com> Thanks, Jan! Here's the original post from Dave: Warmth Filter Template .pch and .pch2 http://mail.electro-music.com/pipermail/nord-modular/2005-July/003023.html Note the attachments that are missing. Matt On 7/14/07, Jan Punter wrote: > > Quoting matthew carpenter : > > > Yes, Dave Peck made it and it was called Warmth something. The message > was > > posted in late June, 2005. > > I have "Warmth examples" made by Dave, but it's dated 2003-06-24, I'll > attach > it > so you can have a look. It does have an elliptical filter in the left > column. > I've got another patch made by Dave called "warmth Idea", but that one has > no > elliptical filter. > > > -- > Jan. > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord-modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070714/21db36cc/attachment.html From matfhew.carpenfer at gmail.com Sat Jul 14 12:56:33 2007 From: matfhew.carpenfer at gmail.com (matthew carpenter) Date: Sat, 14 Jul 2007 15:56:33 -0400 Subject: [NM] NM: 12 kHz Elliptical Filter In-Reply-To: <534d0e850707141255x2d75a866o71b4f6fa080699bd@mail.gmail.com> References: <534d0e850707140913t6368342bw53cfa710e08f94a5@mail.gmail.com> <1184441037.469922cdc223a@webmail.iaf.nl> <534d0e850707141237x1f246084p3901f0d280ad58f2@mail.gmail.com> <1184442568.469928c80727d@webmail.iaf.nl> <534d0e850707141255x2d75a866o71b4f6fa080699bd@mail.gmail.com> Message-ID: <534d0e850707141256w31ea4bf0ia14df327a32a884f@mail.gmail.com> Yep, this is the one! On 7/14/07, matthew carpenter wrote: > > Thanks, Jan! > Here's the original post from Dave: > > Warmth Filter Template .pch and .pch2 > > http://mail.electro-music.com/pipermail/nord-modular/2005-July/003023.html > > > Note the attachments that are missing. > > Matt > > On 7/14/07, Jan Punter wrote: > > > > Quoting matthew carpenter : > > > > > Yes, Dave Peck made it and it was called Warmth something. The message > > was > > > posted in late June, 2005. > > > > I have "Warmth examples" made by Dave, but it's dated 2003-06-24, I'll > > attach > > it > > so you can have a look. It does have an elliptical filter in the left > > column. > > I've got another patch made by Dave called "warmth Idea", but that one > > has no > > elliptical filter. > > > > > > -- > > Jan. > > > > ___________________________________________________________ > > Nord-modular mailing list > > Nord-modular at electro-music.com > > http://mail.electro-music.com/mailman/listinfo/nord-modular > > > > Members: use http://mail.electro-music.com/mailman/options/nord-modular > > to change subscription status, digest options, password, topics, etc. > > > > Patches sent to the Nord-Modular mailing list may not be redistributed > > without the express consent of the author/creator. > > ___________________________________________________________ > > > > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070714/7900188b/attachment.html From j.punter at iaf.nl Sat Jul 14 13:03:24 2007 From: j.punter at iaf.nl (Jan Punter) Date: Sat, 14 Jul 2007 22:03:24 +0200 Subject: [NM] NM: 12 kHz Elliptical Filter In-Reply-To: <534d0e850707141255x2d75a866o71b4f6fa080699bd@mail.gmail.com> References: <534d0e850707140913t6368342bw53cfa710e08f94a5@mail.gmail.com> <1184441037.469922cdc223a@webmail.iaf.nl> <534d0e850707141237x1f246084p3901f0d280ad58f2@mail.gmail.com> <1184442568.469928c80727d@webmail.iaf.nl> <534d0e850707141255x2d75a866o71b4f6fa080699bd@mail.gmail.com> Message-ID: <1184443404.46992c0c69306@webmail.iaf.nl> Quoting matthew carpenter : > Thanks, Jan! You're welcome Matt. > Here's the original post from Dave: I checked, but don't have the patch mentioned in Dave's post, I do believe though (from reading Dave's description) that the patch I just posted uses the same filter. > Note the attachments that are missing. Yes, all attachments are missing in the mail archive. I don't know if this is a bug or intention. Howard are you out there? -- Jan. From davepnord at sbcglobal.net Sat Jul 14 16:30:02 2007 From: davepnord at sbcglobal.net (davepnord Peck) Date: Sat, 14 Jul 2007 16:30:02 -0700 (PDT) Subject: [NM] NM: 12 kHz Elliptical Filter In-Reply-To: <534d0e850707141256w31ea4bf0ia14df327a32a884f@mail.gmail.com> Message-ID: <583132.63160.qm@web81009.mail.mud.yahoo.com> Hi Mathew & all, First, to give credit where credit is due, the NM1 12kHz elliptical warmth filter is Rob H's creation. The G2 patch called "Warmth Filter TemplateG2" was my attempt at a direct NM-to-G2 translation of that filter for the G2. These are the two patches described in the post titled "NM Tilt Test (and psychoacoustics)". However, since that time, Rob has come up with several more warmimg filters for the G2 that work better than the 12k notch variety (for the G2, not for the NM1). These are generally described as 'tilt' filters, since they tilt the entire 20Hz-20kHz audio spectrum (gently boosting the bass end and gently rolling off the treble. This is a different effect than the notch filters which supress a narrow band of high frequency harshness. I'm attaching the original NM1 12kHz eliptical warmth filter template to this email and I'm also attaching a few G2 warmth filters - my direct translation for the G2 (a notch), and a couple of Rob's TILT filters. Please note - I have found that sometimes the G2 tilt filter with the dual multimode filters in it can have unexpected behavior when you copy & paste it into a patch, and it seems to depend on what other modules are in the patch. If you paste it into a patch that also has the "FltNord" 12/24dB filter in it, the tilt filter may malfunction. It will still have some effect, but it will let a lot of very high frequency stuff still pass through. If you copy and paste it into the patch AGAIN, while the first one is still there and move the patch cords from the first one to the second one and THEN delete the first one, it will sometimes fix it. You may have to try deleting modules from the first (unpatched) tilt filter one at a time to find the offending module. Dave Peck --- matthew carpenter wrote: > Yep, this is the one! > > On 7/14/07, matthew carpenter > wrote: > > > > Thanks, Jan! > > Here's the original post from Dave: > > > > Warmth Filter Template .pch and .pch2 > > > > > http://mail.electro-music.com/pipermail/nord-modular/2005-July/003023.html > > > > > > Note the attachments that are missing. > > > > Matt > > > > On 7/14/07, Jan Punter wrote: > > > > > > Quoting matthew carpenter > : > > > -------------- next part -------------- A non-text attachment was scrubbed... Name: Warmth Filter Template.pch Type: application/octet-stream Size: 1363 bytes Desc: 664311915-Warmth Filter Template.pch Url : http://mail.electro-music.com/pipermail/nord-modular/attachments/20070714/712906f1/attachment.obj -------------- next part -------------- A non-text attachment was scrubbed... Name: spectrumtiltfilter2.pch2 Type: application/octet-stream Size: 1671 bytes Desc: 425122474-spectrumtiltfilter2.pch2 Url : http://mail.electro-music.com/pipermail/nord-modular/attachments/20070714/712906f1/attachment-0001.obj -------------- next part -------------- A non-text attachment was scrubbed... Name: spectrumtiltfilter.pch2 Type: application/octet-stream Size: 1612 bytes Desc: 3676945573-spectrumtiltfilter.pch2 Url : http://mail.electro-music.com/pipermail/nord-modular/attachments/20070714/712906f1/attachment-0002.obj -------------- next part -------------- A non-text attachment was scrubbed... Name: Warmth Filter TemplateG2.pch2 Type: application/octet-stream Size: 1542 bytes Desc: 1209124832-Warmth Filter TemplateG2.pch2 Url : http://mail.electro-music.com/pipermail/nord-modular/attachments/20070714/712906f1/attachment-0003.obj From matfhew.carpenfer at gmail.com Tue Jul 24 10:28:51 2007 From: matfhew.carpenfer at gmail.com (cebec) Date: Tue, 24 Jul 2007 10:28:51 -0700 (PDT) Subject: [NM] FS: Nord Micro Modular Message-ID: <11768054.post@talk.nabble.com> Excellent, clean condition. Includes AC adapter and manual. $375 shipped via Priority with insurance. PayPal preferred. Just picked up a Rack so don't need this. Still looking for a G2 Engine. Thanks! -- View this message in context: http://www.nabble.com/FS%3A-Nord-Micro-Modular-tf4137489.html#a11768054 Sent from the Nord - Modular mailing list archive at Nabble.com. From Synapse2k at comcast.net Tue Jul 24 11:02:40 2007 From: Synapse2k at comcast.net (Synapse) Date: Tue, 24 Jul 2007 11:02:40 -0700 Subject: [NM] [G2] FS: G2 Keyboard Unexpanded Message-ID: <1564228002.20070724110240@comcast.net> I'm selling my unaxpended G2 keyboard on E-bay, to make space. I plan to buy a G2 Engine to replace it. $1300 Buy It Now with free shipping anywhere in the U.S. I included pictures. Check it out! http://cgi.ebay.com/Clavia-Nord-Modular-G2-Keyboard_W0QQitemZ260142502833QQihZ016QQcategoryZ38071QQssPageNameZWDVWQQrdZ1QQcmdZViewItem From tommi.lindell at welho.com Wed Jul 25 01:06:48 2007 From: tommi.lindell at welho.com (Tommi Lindell) Date: Wed, 25 Jul 2007 11:06:48 +0300 Subject: [NM] G2 rental in London ? In-Reply-To: <1564228002.20070724110240@comcast.net> References: <1564228002.20070724110240@comcast.net> Message-ID: Hi ! I'm going to play in a radio session at BBC August 27-28 with Finnish group Pepe Deluxe. It looks like the organizers can't find a G2X that I could use there. So I'd like to ask if there's anyone here from the London area who could rent his / hers G2X (or at least G2) for those sessions ? (I could take my own G2X, but it would be quite expensive with a proper flightcase etc.) So if anyone can help me on this, please email me privately: tommi.lindell at welho.com Thanks, Tommi From rasmus at nuovoinizio.se Thu Jul 26 11:43:16 2007 From: rasmus at nuovoinizio.se (=?ISO-8859-1?Q?Rasmus_Ny=E5ker?=) Date: Thu, 26 Jul 2007 20:43:16 +0200 Subject: [NM] [G2] Very simple wavetable patch In-Reply-To: References: <1564228002.20070724110240@comcast.net> Message-ID: First post here... I am not on level with some of you yet, but I am getting seriously attached to my G2 since I got it some months ago. Had a slow day at work today so I wrote down a few patch experiments on paper. The first one I tried when I got home was a simple wavetable synth. I tried to make it as easy as possible to understand. So there should be no problem for anyone here. There are 8 digital style single cycle waveforms (7-bit & 16-steps) based on eight sequencers to make it easy to draw waveforms. There are an oscillator controlling the stepping and one controlling the resetting (pitch up the later to reduce the number of steps per cycle without having to change it on every sequencer). I put it into a simple architecture and made the wavetabling controllable from LFO, envelope or/and manually. To round of the edges as it change in the middle of waveforms you have a X-fade to smooth it off. Hope you can get some interesting results with it! Now I got to start on some more interesting waveshaping experiments... Cheers Rasmus A. Ny?ker PS. You can easily change the patch into a 128 step single cycle handdrawn waveform oscillator by patching together the sequencers. I have no idea why you should, but you can :) ... -------------- next part -------------- A non-text attachment was scrubbed... Name: DigitalWaveTable.pch2 Type: application/octet-stream Size: 4683 bytes Desc: not available Url : http://mail.electro-music.com/pipermail/nord-modular/attachments/20070726/a83d9143/attachment.obj -------------- next part -------------- From matfhew.carpenfer at gmail.com Thu Jul 26 12:04:46 2007 From: matfhew.carpenfer at gmail.com (cebec) Date: Thu, 26 Jul 2007 12:04:46 -0700 (PDT) Subject: [NM] FS: NM Classic Expansion Card Message-ID: <11817056.post@talk.nabble.com> Hi, I have one for sale. Highest offer gets it. I accept PayPal and can ship worldwide ASAP. Thanks, Matt -- View this message in context: http://www.nabble.com/FS%3A-NM-Classic-Expansion-Card-tf4153529.html#a11817056 Sent from the Nord - Modular mailing list archive at Nabble.com. From benoitruelle at yahoo.fr Fri Jul 27 00:16:09 2007 From: benoitruelle at yahoo.fr (Ben) Date: Fri, 27 Jul 2007 09:16:09 +0200 Subject: [NM] [G2] Very simple wavetable patch References: <1564228002.20070724110240@comcast.net> Message-ID: <00ec01c7d01e$0209ee30$6402a8c0@PC576340162804> Thank You. It works with the demo too. It reminds me of the crude sampler someone made on the G1 and the soft to convert a lo-fi "wav" file into chained sequencers. Ben (still on micromod). ----- Original Message ----- From: "Rasmus Ny?ker" To: "Nord Modular mailing list" Sent: Thursday, July 26, 2007 8:43 PM Subject: [NM] [G2] Very simple wavetable patch First post here... I am not on level with some of you yet, but I am getting seriously attached to my G2 since I got it some months ago. Had a slow day at work today so I wrote down a few patch experiments on paper. The first one I tried when I got home was a simple wavetable synth. I tried to make it as easy as possible to understand. So there should be no problem for anyone here. There are 8 digital style single cycle waveforms (7-bit & 16-steps) based on eight sequencers to make it easy to draw waveforms. There are an oscillator controlling the stepping and one controlling the resetting (pitch up the later to reduce the number of steps per cycle without having to change it on every sequencer). I put it into a simple architecture and made the wavetabling controllable from LFO, envelope or/and manually. To round of the edges as it change in the middle of waveforms you have a X-fade to smooth it off. Hope you can get some interesting results with it! Now I got to start on some more interesting waveshaping experiments... Cheers Rasmus A. Ny?ker PS. You can easily change the patch into a 128 step single cycle handdrawn waveform oscillator by patching together the sequencers. I have no idea why you should, but you can :) ... -------------------------------------------------------------------------------- > > -------------------------------------------------------------------------------- > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord-modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ > From blommoo at wanadoo.nl Fri Jul 27 09:58:06 2007 From: blommoo at wanadoo.nl (Wm Blommers) Date: Fri, 27 Jul 2007 18:58:06 +0200 (CEST) Subject: [NM] [G2] Very simple wavetable patch Message-ID: <21083724.3689381185555486420.JavaMail.www@wwinf6103> It's here: http://nm-archives.electro-music.com/010_NordModular/014_Interesting_Threads/Folder/Raw2Pch/Raw2Pch.htm You'll need OS version 2.10 to get it to work. That is on that page too, so you can downgrade. Sorry for the scramled page, but all the info is there. Wout > Datum: 27/07/07 09:17 AM > Van: "Ben" > Aan: "Nord Modular mailing list" > CC: > Onderwerp : Re: [NM] [G2] Very simple wavetable patch > > Thank You. It works with the demo too. > It reminds me of the crude sampler someone made on the G1 and the soft to > convert a lo-fi "wav" file into chained sequencers. > > Ben (still on micromod). > > ----- Original Message ----- > From: "Rasmus Ny?ker" > To: "Nord Modular mailing list" > Sent: Thursday, July 26, 2007 8:43 PM > Subject: [NM] [G2] Very simple wavetable patch > > > First post here... > > I am not on level with some of you yet, but I am getting seriously > attached to my G2 since I got it some months ago. > > Had a slow day at work today so I wrote down a few patch experiments > on paper. The first one I tried when I got home was a simple > wavetable synth. I tried to make it as easy as possible to > understand. So there should be no problem for anyone here. > > There are 8 digital style single cycle waveforms (7-bit & 16-steps) > based on eight sequencers to make it easy to draw waveforms. There > are an oscillator controlling the stepping and one controlling the > resetting (pitch up the later to reduce the number of steps per cycle > without having to change it on every sequencer). I put it into a > simple architecture and made the wavetabling controllable from LFO, > envelope or/and manually. To round of the edges as it change in the > middle of waveforms you have a X-fade to smooth it off. > > Hope you can get some interesting results with it! > > Now I got to start on some more interesting waveshaping experiments... > > > Cheers > > Rasmus A. Ny?ker > > > PS. > You can easily change the patch into a 128 step single cycle > handdrawn waveform oscillator by patching together the sequencers. I > have no idea why you should, but you can :) ... > > > > > > -------------------------------------------------------------------------------- > > > > > > > > > -------------------------------------------------------------------------------- > > > > ___________________________________________________________ > > Nord-modular mailing list > > Nord-modular at electro-music.com > > http://mail.electro-music.com/mailman/listinfo/nord-modular > > > > Members: use http://mail.electro-music.com/mailman/options/nord-modular > > to change subscription status, digest options, password, topics, etc. > > > > Patches sent to the Nord-Modular mailing list may not be redistributed > > without the express consent of the author/creator. > > ___________________________________________________________ > > > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord-modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070727/80bbe247/attachment-0001.html From rasmus at nuovoinizio.se Fri Jul 27 10:58:30 2007 From: rasmus at nuovoinizio.se (=?ISO-8859-1?Q?Rasmus_Ny=E5ker?=) Date: Fri, 27 Jul 2007 19:58:30 +0200 Subject: [NM] [G2] Very simple wavetable patch In-Reply-To: <21083724.3689381185555486420.JavaMail.www@wwinf6103> References: <21083724.3689381185555486420.JavaMail.www@wwinf6103> Message-ID: <8A6A51AF-7764-42C3-AE10-4F0A51DC0B88@nuovoinizio.se> Thanks! I am not owning a NM1 anymore, but it sure gives a lot of new ideas. Just using recording mode in the G2 sequencers to make lo-fi loopers and granual stuff. Wonderful! Thanks again! Cheers Rasmus A. Ny?ker 27 jul 2007 kl. 18.58 skrev Wm Blommers: > It's here: > http://nm-archives.electro-music.com/010_NordModular/ > 014_Interesting_Threads/Folder/Raw2Pch/Raw2Pch.htm > > You'll need OS version 2.10 to get it to work. > That is on that page too, so you can downgrade. > > Sorry for the scramled page, but all the info is there. > > Wout > > > Datum: 27/07/07 09:17 AM > > Van: "Ben" > > Aan: "Nord Modular mailing list" > > CC: > > Onderwerp : Re: [NM] [G2] Very simple wavetable patch > > > > Thank You. It works with the demo too. > > It reminds me of the crude sampler someone made on the G1 and the > soft to > > convert a lo-fi "wav" file into chained sequencers. > > > > Ben (still on micromod). > > > > ----- Original Message ----- > > From: "Rasmus Ny?ker" > > To: "Nord Modular mailing list" > > Sent: Thursday, July 26, 2007 8:43 PM > > Subject: [NM] [G2] Very simple wavetable patch > > > > > > First post here... > > > > I am not on level with some of you yet, but I am getting seriously > > attached to my G2 since I got it some months ago. > > > > Had a slow day at work today so I wrote down a few patch experiments > > on paper. The first one I tried when I got home was a simple > > wavetable synth. I tried to make it as easy as possible to > > understand. So there should be no problem for anyone here. > > > > There are 8 digital style single cycle waveforms (7-bit & 16-steps) > > based on eight sequencers to make it easy to draw waveforms. There > > are an oscillator controlling the stepping and one controlling the > > resetting (pitch up the later to reduce the number of steps per > cycle > > without having to change it on every sequencer). I put it into a > > simple architecture and made the wavetabling controllable from LFO, > > envelope or/and manually. To round of the edges as it change in the > > middle of waveforms you have a X-fade to smooth it off. > > > > Hope you can get some interesting results with it! > > > > Now I got to start on some more interesting waveshaping > experiments... > > > > > > Cheers > > > > Rasmus A. Ny?ker > > > > > > PS. > > You can easily change the patch into a 128 step single cycle > > handdrawn waveform oscillator by patching together the sequencers. I > > have no idea why you should, but you can :) ... > > > > > > > > > > > > > ---------------------------------------------------------------------- > ---------- > > > > > > > > > > > > > > > > > ---------------------------------------------------------------------- > ---------- > > > > > > > ___________________________________________________________ > > > Nord-modular mailing list > > > Nord-modular at electro-music.com > > > http://mail.electro-music.com/mailman/listinfo/nord-modular > > > > > > Members: use http://mail.electro-music.com/mailman/options/nord- > modular > > > to change subscription status, digest options, password, > topics, etc. > > > > > > Patches sent to the Nord-Modular mailing list may not be > redistributed > > > without the express consent of the author/creator. > > > ___________________________________________________________ > > > > > > > ___________________________________________________________ > > Nord-modular mailing list > > Nord-modular at electro-music.com > > http://mail.electro-music.com/mailman/listinfo/nord-modular > > > > Members: use http://mail.electro-music.com/mailman/options/nord- > modular > > to change subscription status, digest options, password, topics, > etc. > > > > Patches sent to the Nord-Modular mailing list may not be > redistributed > > without the express consent of the author/creator. > > ___________________________________________________________ > > > > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord- > modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070727/cae6cae0/attachment.html From honer at shaw.ca Fri Jul 27 13:33:14 2007 From: honer at shaw.ca (T COLYER) Date: Fri, 27 Jul 2007 15:33:14 -0500 Subject: [NM] FS: NM Classic Expansion Card In-Reply-To: <11817056.post@talk.nabble.com> References: <11817056.post@talk.nabble.com> Message-ID: $180 ----- Original Message ----- From: cebec Date: Thursday, July 26, 2007 2:07 pm Subject: [NM] FS: NM Classic Expansion Card To: nord-modular at electro-music.com > > Hi, > I have one for sale. Highest offer gets it. I accept > PayPal and can ship > worldwide ASAP. > Thanks, > Matt > -- > View this message in context: http://www.nabble.com/FS%3A-NM- > Classic-Expansion-Card-tf4153529.html#a11817056 > Sent from the Nord - Modular mailing list archive at Nabble.com. > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord- > modularto change subscription status, digest options, password, > topics, etc. > > Patches sent to the Nord-Modular mailing list may not be > redistributed > without the express consent of the author/creator. > ___________________________________________________________ > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070727/66f395f7/attachment.html From matfhew.carpenfer at gmail.com Fri Jul 27 13:40:28 2007 From: matfhew.carpenfer at gmail.com (matthew carpenter) Date: Fri, 27 Jul 2007 16:40:28 -0400 Subject: [NM] FS: NM Classic Expansion Card In-Reply-To: References: <11817056.post@talk.nabble.com> Message-ID: <534d0e850707271340t3732e4ffi7240d72e1b5865eb@mail.gmail.com> Thanks, I'll collect offers over the weekend and get back to you! Matt On 7/27/07, T COLYER wrote: > > $180 > > ----- Original Message ----- > From: cebec > Date: Thursday, July 26, 2007 2:07 pm > Subject: [NM] FS: NM Classic Expansion Card > To: nord-modular at electro-music.com > > > > > Hi, > > I have one for sale. Highest offer gets it. I accept > > PayPal and can ship > > worldwide ASAP. > > Thanks, > > Matt > > -- > > View this message in context: http://www.nabble.com/FS%3A-NM- > > Classic-Expansion-Card-tf4153529.html#a11817056 > > Sent from the Nord - Modular mailing list archive at Nabble.com. > > > > ___________________________________________________________ > > Nord-modular mailing list > > Nord-modular at electro-music.com > > http://mail.electro-music.com/mailman/listinfo/nord-modular > > > > Members: use http://mail.electro-music.com/mailman/options/nord- > > modularto change subscription status, digest options, password, > > topics, etc. > > > > Patches sent to the Nord-Modular mailing list may not be > > redistributed > > without the express consent of the author/creator. > > ___________________________________________________________ > > > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord-modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070727/d7d22862/attachment.html From rasmus at nuovoinizio.se Sat Jul 28 12:40:37 2007 From: rasmus at nuovoinizio.se (=?ISO-8859-1?Q?Rasmus_Ny=E5ker?=) Date: Sat, 28 Jul 2007 21:40:37 +0200 Subject: [NM] [G2] Non-Volatile Lo-Fi Sampler (was: Very simple wavetable patch) In-Reply-To: <21083724.3689381185555486420.JavaMail.www@wwinf6103> References: <21083724.3689381185555486420.JavaMail.www@wwinf6103> Message-ID: <5A766B49-9A4A-4FE6-9624-C31F2F24F170@nuovoinizio.se> Okey, let's kick it! My first take on a non-volatile lo-fi sampler for the G2. No mark-ups yet (it is fairly easy to get though). It is a performance for a non- expanded modular. You use the sample enable switch in slot A to set it "sampling enable" and press a key on the keyboard to start sampling (this also sets frequency and lenght as the clock frequency is controlled by the note frequency). The total lenght of the sampling is 512 segments (32 x 16 steps) and is a segment depth of 96 or something. It sounds crap of course, and I haven't used the performance mode before so I have no clue on how to assign variations, so the only sample now is a short elektron machinedrum beat I had running during patching. On slot B (fx-section) there is a filter and reverb just to soften the noise on my ear while patching... Well, hope someone out there can find any use in it! cheers Rasmus A. Ny?ker ? 27 jul 2007 kl. 18.58 skrev Wm Blommers: > It's here: > http://nm-archives.electro-music.com/010_NordModular/ > 014_Interesting_Threads/Folder/Raw2Pch/Raw2Pch.htm > > You'll need OS version 2.10 to get it to work. > That is on that page too, so you can downgrade. > > Sorry for the scramled page, but all the info is there. > > Wout > > > Datum: 27/07/07 09:17 AM > > Van: "Ben" > > Aan: "Nord Modular mailing list" > > CC: > > Onderwerp : Re: [NM] [G2] Very simple wavetable patch > > > > Thank You. It works with the demo too. > > It reminds me of the crude sampler someone made on the G1 and the > soft to > > convert a lo-fi "wav" file into chained sequencers. > > > > Ben (still on micromod). > > > > ----- Original Message ----- > > From: "Rasmus Ny?ker" > > To: "Nord Modular mailing list" > > Sent: Thursday, July 26, 2007 8:43 PM > > Subject: [NM] [G2] Very simple wavetable patch > > > > > > First post here... > > > > I am not on level with some of you yet, but I am getting seriously > > attached to my G2 since I got it some months ago. > > > > Had a slow day at work today so I wrote down a few patch experiments > > on paper. The first one I tried when I got home was a simple > > wavetable synth. I tried to make it as easy as possible to > > understand. So there should be no problem for anyone here. > > > > There are 8 digital style single cycle waveforms (7-bit & 16-steps) > > based on eight sequencers to make it easy to draw waveforms. There > > are an oscillator controlling the stepping and one controlling the > > resetting (pitch up the later to reduce the number of steps per > cycle > > without having to change it on every sequencer). I put it into a > > simple architecture and made the wavetabling controllable from LFO, > > envelope or/and manually. To round of the edges as it change in the > > middle of waveforms you have a X-fade to smooth it off. > > > > Hope you can get some interesting results with it! > > > > Now I got to start on some more interesting waveshaping > experiments... > > > > > > Cheers > > > > Rasmus A. Ny?ker > > > > > > PS. > > You can easily change the patch into a 128 step single cycle > > handdrawn waveform oscillator by patching together the sequencers. I > > have no idea why you should, but you can :) ... > > > > > > > > > > > > > ---------------------------------------------------------------------- > ---------- > > > > > > > > > > > > > > > > > ---------------------------------------------------------------------- > ---------- > > > > > > > ___________________________________________________________ > > > Nord-modular mailing list > > > Nord-modular at electro-music.com > > > http://mail.electro-music.com/mailman/listinfo/nord-modular > > > > > > Members: use http://mail.electro-music.com/mailman/options/nord- > modular > > > to change subscription status, digest options, password, > topics, etc. > > > > > > Patches sent to the Nord-Modular mailing list may not be > redistributed > > > without the express consent of the author/creator. > > > ___________________________________________________________ > > > > > > > ___________________________________________________________ > > Nord-modular mailing list > > Nord-modular at electro-music.com > > http://mail.electro-music.com/mailman/listinfo/nord-modular > > > > Members: use http://mail.electro-music.com/mailman/options/nord- > modular > > to change subscription status, digest options, password, topics, > etc. > > > > Patches sent to the Nord-Modular mailing list may not be > redistributed > > without the express consent of the author/creator. > > ___________________________________________________________ > > > > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord- > modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070728/cece09fa/attachment.html -------------- next part -------------- A non-text attachment was scrubbed... Name: Sampler.prf2 Type: application/octet-stream Size: 15530 bytes Desc: not available Url : http://mail.electro-music.com/pipermail/nord-modular/attachments/20070728/cece09fa/attachment.obj -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070728/cece09fa/attachment-0001.html From blommoo at wanadoo.nl Sun Jul 29 02:38:17 2007 From: blommoo at wanadoo.nl (Wm Blommers) Date: Sun, 29 Jul 2007 11:38:17 +0200 (CEST) Subject: [NM] [G2] Non-Volatile Lo-Fi Sampler (was: Very simple wavetable patch) Message-ID: <4398166.20891185701897930.JavaMail.www@wwinf6301> Interesting :-) No text at all... Wout > Datum: 28/07/07 09:45 PM > Van: "Rasmus Ny?ker" > Aan: "Nord Modular mailing list" > CC: > Onderwerp : [NM] [G2] Non-Volatile Lo-Fi Sampler (was: Very simple wavetable patch) > > > > [ (geen bestandsnaam) (0.5 Kb) ] -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070729/ab7f6f72/attachment.html From matfhew.carpenfer at gmail.com Mon Jul 30 06:57:18 2007 From: matfhew.carpenfer at gmail.com (matthew carpenter) Date: Mon, 30 Jul 2007 09:57:18 -0400 Subject: [NM] FS: NM Classic Expansion Card In-Reply-To: References: <11817056.post@talk.nabble.com> Message-ID: <534d0e850707300657o722958f8i93507377bcd780ea@mail.gmail.com> Hi, Just wanted to let you know that the card has sold. Thanks for your offer. Matt On 7/27/07, T COLYER wrote: > > $180 > > ----- Original Message ----- > From: cebec > Date: Thursday, July 26, 2007 2:07 pm > Subject: [NM] FS: NM Classic Expansion Card > To: nord-modular at electro-music.com > > > > > Hi, > > I have one for sale. Highest offer gets it. I accept > > PayPal and can ship > > worldwide ASAP. > > Thanks, > > Matt > > -- > > View this message in context: http://www.nabble.com/FS%3A-NM- > > Classic-Expansion-Card-tf4153529.html#a11817056 > > Sent from the Nord - Modular mailing list archive at Nabble.com. > > > > ___________________________________________________________ > > Nord-modular mailing list > > Nord-modular at electro-music.com > > http://mail.electro-music.com/mailman/listinfo/nord-modular > > > > Members: use http://mail.electro-music.com/mailman/options/nord- > > modularto change subscription status, digest options, password, > > topics, etc. > > > > Patches sent to the Nord-Modular mailing list may not be > > redistributed > > without the express consent of the author/creator. > > ___________________________________________________________ > > > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord-modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070730/7802a21d/attachment.html From ole.gamnes.news at c2i.net Tue Jul 3 11:45:11 2007 From: ole.gamnes.news at c2i.net (Ole) Date: Tue, 3 Jul 2007 20:45:11 +0200 Subject: [NM] Problem with NM1 and Cubase References: <380B3883-928E-4751-BF7D-53E968CC0E2D@3phase.de> Message-ID: <002c01c7bda2$49b68b00$0200a8c0@KONTOR> Hi, (my first message to the list). I've bought a NM Classic and created a patch that I am controlling from Cubase. Everything works well recording in Cubase and replaying through Cubase untill I press "Stop" after that my NM turns several octaves down in pitch ! It will only play properly after I turn the synth off and back on again. However, the same thing happens when I hit "stop" in my sequencer and try to play again. Do anyone have a clue to what might be wrong in my setup? best regards ole From clkdiv at yahoo.de Tue Jul 3 14:51:05 2007 From: clkdiv at yahoo.de (Martin Hoppe) Date: Tue, 3 Jul 2007 23:51:05 +0200 Subject: [NM] Problem with NM1 and Cubase In-Reply-To: <002c01c7bda2$49b68b00$0200a8c0@KONTOR> Message-ID: <200707032151.l63Lp427003410@srv1.electro-music.com> I am almost sure that happens because Cubase is sending a midi controller value at stop. Make sure, your patch does not have any controllers assigned (use the F9-key to see the assigned midi controllers) then try again. Good luck... -----Urspr?ngliche Nachricht----- Von: nord-modular-bounces at electro-music.com [mailto:nord-modular-bounces at electro-music.com] Im Auftrag von Ole Gesendet: Dienstag, 3. Juli 2007 20:45 An: Nord Modular mailing list Betreff: [NM] Problem with NM1 and Cubase Hi, (my first message to the list). I've bought a NM Classic and created a patch that I am controlling from Cubase. Everything works well recording in Cubase and replaying through Cubase untill I press "Stop" after that my NM turns several octaves down in pitch ! It will only play properly after I turn the synth off and back on again. However, the same thing happens when I hit "stop" in my sequencer and try to play again. Do anyone have a clue to what might be wrong in my setup? best regards ole ___________________________________________________________ Nord-modular mailing list Nord-modular at electro-music.com http://mail.electro-music.com/mailman/listinfo/nord-modular Members: use http://mail.electro-music.com/mailman/options/nord-modular to change subscription status, digest options, password, topics, etc. Patches sent to the Nord-Modular mailing list may not be redistributed without the express consent of the author/creator. ___________________________________________________________ From chillymitchy at gmail.com Tue Jul 3 15:06:57 2007 From: chillymitchy at gmail.com (Chilly Mitchy) Date: Wed, 4 Jul 2007 00:06:57 +0200 Subject: [NM] Problem with NM1 and Cubase In-Reply-To: <200707032151.l63Lp427003410@srv1.electro-music.com> References: <200707032151.l63Lp427003410@srv1.electro-music.com> Message-ID: <0dd146bdb1f282ebcfd202b79ed14d67@gmail.com> I'm not using cubase, but could it be that the track that's controlling the G2 is set on a fixed transpose ? Try pressing "shift" and the 'global' "Octave Shift" at the same time ? Maybe that helps ? Good luck ! On Jul 3, 2007, at 11:51 PM, Martin Hoppe wrote: > I am almost sure that happens because Cubase is sending a midi > controller > value at stop. Make sure, your patch does not have any controllers > assigned > (use the F9-key to see the assigned midi controllers) then try again. > Good > luck... > > -----Urspr?ngliche Nachricht----- > Von: nord-modular-bounces at electro-music.com > [mailto:nord-modular-bounces at electro-music.com] Im Auftrag von Ole > Gesendet: Dienstag, 3. Juli 2007 20:45 > An: Nord Modular mailing list > Betreff: [NM] Problem with NM1 and Cubase > > Hi, > (my first message to the list). > > I've bought a NM Classic and created a patch that I am controlling from > Cubase. Everything works well recording in Cubase and replaying through > Cubase untill I press "Stop" after that my NM turns several octaves > down in > pitch ! It will only play properly after I turn the synth off and back > on > again. However, the same thing happens when I hit "stop" in my > sequencer and > try to play again. Do anyone have a clue to what might be wrong in my > setup? > > best regards > ole > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord-modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ > > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord-modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ > > http://www.myspace.com/descargaelectrica From sonic.kitchen at gmail.com Tue Jul 3 16:17:16 2007 From: sonic.kitchen at gmail.com (Sonic Kooking) Date: Wed, 4 Jul 2007 01:17:16 +0200 Subject: [NM] Nord Modular and Max Message-ID: hallo, i don't get it, i've tried the get control number from the knobs on my nord modular in max, but nothing happens appears. must i set the modular controls to external? thanks dennis From sonic.kitchen at gmail.com Tue Jul 3 16:18:03 2007 From: sonic.kitchen at gmail.com (Sonic Kooking) Date: Wed, 4 Jul 2007 01:18:03 +0200 Subject: [NM] Nord Modular and Max Message-ID: <27D037B4-0CAC-44C6-9DBE-A5412E78FE48@gmail.com> hallo, sorry i forgot to include, nord modular keys and mac g4, maxmsp 4.63, os.10.4.9 thanks dennis From chillymitchy at gmail.com Tue Jul 3 16:20:03 2007 From: chillymitchy at gmail.com (Chilly Mitchy) Date: Wed, 4 Jul 2007 01:20:03 +0200 Subject: [NM] Nord Modular and Max In-Reply-To: <27D037B4-0CAC-44C6-9DBE-A5412E78FE48@gmail.com> References: <27D037B4-0CAC-44C6-9DBE-A5412E78FE48@gmail.com> Message-ID: <8018ab1553435ad5a004ffdb49aa08eb@gmail.com> Did u assign the knob to a cc# ? On Jul 4, 2007, at 1:18 AM, Sonic Kooking wrote: > > hallo, > > sorry i forgot to include, nord modular keys and mac g4, maxmsp 4.63, > os.10.4.9 > > thanks > dennis > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord-modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ > > http://www.myspace.com/descargaelectrica From sonic.kitchen at gmail.com Tue Jul 3 16:54:32 2007 From: sonic.kitchen at gmail.com (Sonic Kooking) Date: Wed, 4 Jul 2007 01:54:32 +0200 Subject: [NM] Nord Modular and Max In-Reply-To: <8018ab1553435ad5a004ffdb49aa08eb@gmail.com> References: <27D037B4-0CAC-44C6-9DBE-A5412E78FE48@gmail.com> <8018ab1553435ad5a004ffdb49aa08eb@gmail.com> Message-ID: <69868BC3-7FA6-43F2-92D6-E14DBEE325B1@gmail.com> hi no, i will try it out and report soon. dennis Am 04.07.2007 um 01:20 schrieb Chilly Mitchy: > Did u assign the knob to a cc# ? > On Jul 4, 2007, at 1:18 AM, Sonic Kooking wrote: > >> >> hallo, >> >> sorry i forgot to include, nord modular keys and mac g4, maxmsp 4.63, >> os.10.4.9 >> >> thanks >> dennis >> ___________________________________________________________ >> Nord-modular mailing list >> Nord-modular at electro-music.com >> http://mail.electro-music.com/mailman/listinfo/nord-modular >> >> Members: use http://mail.electro-music.com/mailman/options/nord- >> modular >> to change subscription status, digest options, password, topics, etc. >> >> Patches sent to the Nord-Modular mailing list may not be >> redistributed >> without the express consent of the author/creator. >> ___________________________________________________________ >> >> > http://www.myspace.com/descargaelectrica > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord- > modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ From sberweck at gmx.de Wed Jul 4 03:42:48 2007 From: sberweck at gmx.de (Sebastian Berweck) Date: Wed, 4 Jul 2007 12:42:48 +0200 Subject: [NM] Nord Modular and Max In-Reply-To: <69868BC3-7FA6-43F2-92D6-E14DBEE325B1@gmail.com> Message-ID: <200707041041.l64AfdiE018095@srv1.electro-music.com> And don't forget to check the MIDI settings in the Synth settings menu. -----Urspr?ngliche Nachricht----- Von: nord-modular-bounces at electro-music.com [mailto:nord-modular-bounces at electro-music.com] Im Auftrag von Sonic Kooking Gesendet: Mittwoch, 4. Juli 2007 01:55 An: Nord Modular mailing list Betreff: Re: [NM] Nord Modular and Max hi no, i will try it out and report soon. dennis Am 04.07.2007 um 01:20 schrieb Chilly Mitchy: > Did u assign the knob to a cc# ? > On Jul 4, 2007, at 1:18 AM, Sonic Kooking wrote: > >> >> hallo, >> >> sorry i forgot to include, nord modular keys and mac g4, maxmsp 4.63, >> os.10.4.9 >> >> thanks >> dennis >> ___________________________________________________________ >> Nord-modular mailing list >> Nord-modular at electro-music.com >> http://mail.electro-music.com/mailman/listinfo/nord-modular >> >> Members: use http://mail.electro-music.com/mailman/options/nord- >> modular >> to change subscription status, digest options, password, topics, etc. >> >> Patches sent to the Nord-Modular mailing list may not be >> redistributed without the express consent of the author/creator. >> ___________________________________________________________ >> >> > http://www.myspace.com/descargaelectrica > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord- > modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ ___________________________________________________________ Nord-modular mailing list Nord-modular at electro-music.com http://mail.electro-music.com/mailman/listinfo/nord-modular Members: use http://mail.electro-music.com/mailman/options/nord-modular to change subscription status, digest options, password, topics, etc. Patches sent to the Nord-Modular mailing list may not be redistributed without the express consent of the author/creator. ___________________________________________________________ From sonic.kitchen at gmail.com Wed Jul 4 05:40:22 2007 From: sonic.kitchen at gmail.com (Sonic Kooking) Date: Wed, 4 Jul 2007 14:40:22 +0200 Subject: [NM] Nord Modular and Max In-Reply-To: <200707041041.l64AfdiE018095@srv1.electro-music.com> References: <200707041041.l64AfdiE018095@srv1.electro-music.com> Message-ID: <09564DBA-2F6F-4C97-8B76-E91035EF2F4F@gmail.com> hi you mean the midi channels? i've not tried it out yet, as i've to finished up a project soon. but what i've tried in max using ctrlin, notein. I receive notein but not ctrlin. port and channel is the right one. dennis Am 04.07.2007 um 12:42 schrieb Sebastian Berweck: > And don't forget to check the MIDI settings in the Synth settings > menu. > > -----Urspr?ngliche Nachricht----- > Von: nord-modular-bounces at electro-music.com > [mailto:nord-modular-bounces at electro-music.com] Im Auftrag von > Sonic Kooking > Gesendet: Mittwoch, 4. Juli 2007 01:55 > An: Nord Modular mailing list > Betreff: Re: [NM] Nord Modular and Max > > hi > > no, i will try it out and report soon. > > dennis > Am 04.07.2007 um 01:20 schrieb Chilly Mitchy: > >> Did u assign the knob to a cc# ? >> On Jul 4, 2007, at 1:18 AM, Sonic Kooking wrote: >> >>> >>> hallo, >>> >>> sorry i forgot to include, nord modular keys and mac g4, maxmsp >>> 4.63, >>> os.10.4.9 >>> >>> thanks >>> dennis >>> ___________________________________________________________ >>> Nord-modular mailing list >>> Nord-modular at electro-music.com >>> http://mail.electro-music.com/mailman/listinfo/nord-modular >>> >>> Members: use http://mail.electro-music.com/mailman/options/nord- >>> modular >>> to change subscription status, digest options, password, topics, >>> etc. >>> >>> Patches sent to the Nord-Modular mailing list may not be >>> redistributed without the express consent of the author/creator. >>> ___________________________________________________________ >>> >>> >> http://www.myspace.com/descargaelectrica >> >> ___________________________________________________________ >> Nord-modular mailing list >> Nord-modular at electro-music.com >> http://mail.electro-music.com/mailman/listinfo/nord-modular >> >> Members: use http://mail.electro-music.com/mailman/options/nord- >> modular >> to change subscription status, digest options, password, topics, etc. >> >> Patches sent to the Nord-Modular mailing list may not be >> redistributed >> without the express consent of the author/creator. >> ___________________________________________________________ > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord- > modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ > > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord- > modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ From sberweck at gmx.de Wed Jul 4 06:40:22 2007 From: sberweck at gmx.de (Sebastian Berweck) Date: Wed, 4 Jul 2007 15:40:22 +0200 Subject: [NM] Nord Modular and Max In-Reply-To: <09564DBA-2F6F-4C97-8B76-E91035EF2F4F@gmail.com> Message-ID: <200707041339.l64DdEk0021717@srv1.electro-music.com> Yes, the MIDI channels and if they're active or not. But I guess they're already active since you receive notein. -----Urspr?ngliche Nachricht----- Von: nord-modular-bounces at electro-music.com [mailto:nord-modular-bounces at electro-music.com] Im Auftrag von Sonic Kooking Gesendet: Mittwoch, 4. Juli 2007 14:40 An: Nord Modular mailing list Betreff: Re: [NM] Nord Modular and Max hi you mean the midi channels? i've not tried it out yet, as i've to finished up a project soon. but what i've tried in max using ctrlin, notein. I receive notein but not ctrlin. port and channel is the right one. dennis Am 04.07.2007 um 12:42 schrieb Sebastian Berweck: > And don't forget to check the MIDI settings in the Synth settings > menu. > > -----Urspr?ngliche Nachricht----- > Von: nord-modular-bounces at electro-music.com > [mailto:nord-modular-bounces at electro-music.com] Im Auftrag von Sonic > Kooking > Gesendet: Mittwoch, 4. Juli 2007 01:55 > An: Nord Modular mailing list > Betreff: Re: [NM] Nord Modular and Max > > hi > > no, i will try it out and report soon. > > dennis > Am 04.07.2007 um 01:20 schrieb Chilly Mitchy: > >> Did u assign the knob to a cc# ? >> On Jul 4, 2007, at 1:18 AM, Sonic Kooking wrote: >> >>> >>> hallo, >>> >>> sorry i forgot to include, nord modular keys and mac g4, maxmsp >>> 4.63, >>> os.10.4.9 >>> >>> thanks >>> dennis >>> ___________________________________________________________ >>> Nord-modular mailing list >>> Nord-modular at electro-music.com >>> http://mail.electro-music.com/mailman/listinfo/nord-modular >>> >>> Members: use http://mail.electro-music.com/mailman/options/nord- >>> modular >>> to change subscription status, digest options, password, topics, >>> etc. >>> >>> Patches sent to the Nord-Modular mailing list may not be >>> redistributed without the express consent of the author/creator. >>> ___________________________________________________________ >>> >>> >> http://www.myspace.com/descargaelectrica >> >> ___________________________________________________________ >> Nord-modular mailing list >> Nord-modular at electro-music.com >> http://mail.electro-music.com/mailman/listinfo/nord-modular >> >> Members: use http://mail.electro-music.com/mailman/options/nord- >> modular >> to change subscription status, digest options, password, topics, etc. >> >> Patches sent to the Nord-Modular mailing list may not be >> redistributed without the express consent of the author/creator. >> ___________________________________________________________ > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord- > modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ > > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord- > modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ ___________________________________________________________ Nord-modular mailing list Nord-modular at electro-music.com http://mail.electro-music.com/mailman/listinfo/nord-modular Members: use http://mail.electro-music.com/mailman/options/nord-modular to change subscription status, digest options, password, topics, etc. Patches sent to the Nord-Modular mailing list may not be redistributed without the express consent of the author/creator. ___________________________________________________________ From ole.gamnes.news at c2i.net Thu Jul 5 09:40:45 2007 From: ole.gamnes.news at c2i.net (Ole) Date: Thu, 5 Jul 2007 18:40:45 +0200 Subject: [NM] Problem with NM1 and Cubase References: <200707032151.l63Lp427003410@srv1.electro-music.com> Message-ID: <006301c7bf23$3c0639b0$0200a8c0@KONTOR> Hi Martin, You were right. I had a patch where the footpedal controlled the pitch via one of the morphgroups. Somehow this is reset(?) everytime cubase was stopped somehow and the pitch went down really low. Thanks. ole NMG1, cubase5 and MacOS9.2 ----- Original Message ----- From: "Martin Hoppe" To: "'Nord Modular mailing list'" Sent: Tuesday, July 03, 2007 11:51 PM Subject: Re: [NM] Problem with NM1 and Cubase I am almost sure that happens because Cubase is sending a midi controller value at stop. Make sure, your patch does not have any controllers assigned (use the F9-key to see the assigned midi controllers) then try again. Good luck... -----Urspr?ngliche Nachricht----- Von: nord-modular-bounces at electro-music.com [mailto:nord-modular-bounces at electro-music.com] Im Auftrag von Ole Gesendet: Dienstag, 3. Juli 2007 20:45 An: Nord Modular mailing list Betreff: [NM] Problem with NM1 and Cubase Hi, (my first message to the list). I've bought a NM Classic and created a patch that I am controlling from Cubase. Everything works well recording in Cubase and replaying through Cubase untill I press "Stop" after that my NM turns several octaves down in pitch ! It will only play properly after I turn the synth off and back on again. However, the same thing happens when I hit "stop" in my sequencer and try to play again. Do anyone have a clue to what might be wrong in my setup? best regards ole ___________________________________________________________ Nord-modular mailing list Nord-modular at electro-music.com http://mail.electro-music.com/mailman/listinfo/nord-modular Members: use http://mail.electro-music.com/mailman/options/nord-modular to change subscription status, digest options, password, topics, etc. Patches sent to the Nord-Modular mailing list may not be redistributed without the express consent of the author/creator. ___________________________________________________________ ___________________________________________________________ Nord-modular mailing list Nord-modular at electro-music.com http://mail.electro-music.com/mailman/listinfo/nord-modular Members: use http://mail.electro-music.com/mailman/options/nord-modular to change subscription status, digest options, password, topics, etc. Patches sent to the Nord-Modular mailing list may not be redistributed without the express consent of the author/creator. ___________________________________________________________ From matfhew.carpenfer at gmail.com Fri Jul 6 12:22:47 2007 From: matfhew.carpenfer at gmail.com (matthew carpenter) Date: Fri, 6 Jul 2007 15:22:47 -0400 Subject: [NM] WTB: Nord G2 Engine and Nord Modular Rack Message-ID: <534d0e850707061222t4d449cacwaad6818dd0e0e817@mail.gmail.com> Please contact me if you have either for sale in excellent condition and can accept PayPal. I have many references. Thanks! Matt -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070706/399ee67b/attachment-0002.html From h at mosc.com Wed Jul 11 13:08:31 2007 From: h at mosc.com (Howard Moscovitz) Date: Wed, 11 Jul 2007 16:08:31 -0400 Subject: [NM] email problems with list Message-ID: <469538BF.1020806@mosc.com> There have lately been some technical issues with the electro-music.com DNS services that may have caused this email list to not be working. I think the problem is resolved now. If you get this, it is. There may be some messages to the list that didn't make it, and may never get through. If you sent such a message in the last few days that hasn't been reflected to the list, please resend it. Sorry for the inconvenience. Howard From h at mosc.com Wed Jul 11 13:17:50 2007 From: h at mosc.com (Howard Moscovitz) Date: Wed, 11 Jul 2007 16:17:50 -0400 Subject: [NM] My G2 on myspace In-Reply-To: <002201c79d71$0b5e1950$0200a8c0@perf0445911f6c> References: <002201c79d71$0b5e1950$0200a8c0@perf0445911f6c> Message-ID: <46953AEE.50906@mosc.com> Thanks for the link, Per. Great music. --Howard Per Wikstr?m wrote: > Hi folks, > On www.myspace.com/ratstudiossoutheast > there are some pictures and > music samples of my G2 controlled virtual/real analogue modular. It is > open since some hours only, but hope to use it as a synth blog for this > project. From controlvoltage at gmail.com Fri Jul 13 09:51:58 2007 From: controlvoltage at gmail.com (Amos) Date: Fri, 13 Jul 2007 12:51:58 -0400 Subject: [NM] Please help me to edit my NM1 Message-ID: <908a4c120707130951v11462bcfo114008e959780d38@mail.gmail.com> Hello, I have owned a NM1 rack for some time, but I have never been able to get the editor to recognize it. I use winXP (SP2) which I gather is not very good at running the Nord Modular editor 3.03 from Clavia. I have tried the open source editor just today and it does connect to the Nord, but I gather that not all modules are supported by the open-source editor. This is very frustrating! Does anyone have some suggestions about compatibility settings or other technomagic I could try to get the official editor to work? I am aching to program this synth... also, if anyone with experience in using the open-source editor could tell me precisely what it is missing and how much of a problem that is for creating patches, I am very curious to know more. Thank you very much! -Amos -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070713/173d12c2/attachment-0002.html From matfhew.carpenfer at gmail.com Fri Jul 13 09:55:25 2007 From: matfhew.carpenfer at gmail.com (matthew carpenter) Date: Fri, 13 Jul 2007 12:55:25 -0400 Subject: [NM] Please help me to edit my NM1 In-Reply-To: <908a4c120707130951v11462bcfo114008e959780d38@mail.gmail.com> References: <908a4c120707130951v11462bcfo114008e959780d38@mail.gmail.com> Message-ID: <534d0e850707130955x9b49b82l651ca3bcc0c4b117@mail.gmail.com> It's really easy. Right-click the shortcut to the NM Editor and go to the Compatibility tab and set the compatibility to Windows 98 and click OK. Should work then. This comes up ALL the time. On 7/13/07, Amos wrote: > > Hello, > > I have owned a NM1 rack for some time, but I have never been able to get > the editor to recognize it. I use winXP (SP2) which I gather is not very > good at running the Nord Modular editor 3.03 from Clavia. I have tried > the open source editor just today and it does connect to the Nord, but I > gather that not all modules are supported by the open-source editor. This > is very frustrating! Does anyone have some suggestions about compatibility > settings or other technomagic I could try to get the official editor to > work? I am aching to program this synth... also, if anyone with experience > in using the open-source editor could tell me precisely what it is missing > and how much of a problem that is for creating patches, I am very curious to > know more. Thank you very much! > > -Amos > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord-modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070713/8a76e196/attachment-0002.html From m.sulmona at wanadoo.fr Fri Jul 13 10:56:43 2007 From: m.sulmona at wanadoo.fr (m.sulmona) Date: Fri, 13 Jul 2007 19:56:43 +0200 Subject: [NM] Please help me to edit my NM1 References: <908a4c120707130951v11462bcfo114008e959780d38@mail.gmail.com> <534d0e850707130955x9b49b82l651ca3bcc0c4b117@mail.gmail.com> Message-ID: <002001c7c577$2c59c810$d73b7b52@allez> Fantastic... I had the same problem and was too ashamed to ask... THANX A LOT !!!! ----- Original Message ----- From: matthew carpenter To: Nord Modular mailing list Sent: Friday, July 13, 2007 6:55 PM Subject: Re: [NM] Please help me to edit my NM1 It's really easy. Right-click the shortcut to the NM Editor and go to the Compatibility tab and set the compatibility to Windows 98 and click OK. Should work then. This comes up ALL the time. On 7/13/07, Amos wrote: Hello, I have owned a NM1 rack for some time, but I have never been able to get the editor to recognize it. I use winXP (SP2) which I gather is not very good at running the Nord Modular editor 3.03 from Clavia. I have tried the open source editor just today and it does connect to the Nord, but I gather that not all modules are supported by the open-source editor. This is very frustrating! Does anyone have some suggestions about compatibility settings or other technomagic I could try to get the official editor to work? I am aching to program this synth... also, if anyone with experience in using the open-source editor could tell me precisely what it is missing and how much of a problem that is for creating patches, I am very curious to know more. Thank you very much! -Amos ___________________________________________________________ Nord-modular mailing list Nord-modular at electro-music.com http://mail.electro-music.com/mailman/listinfo/nord-modular Members: use http://mail.electro-music.com/mailman/options/nord-modular to change subscription status, digest options, password, topics, etc. Patches sent to the Nord-Modular mailing list may not be redistributed without the express consent of the author/creator. ___________________________________________________________ ------------------------------------------------------------------------------ ___________________________________________________________ Nord-modular mailing list Nord-modular at electro-music.com http://mail.electro-music.com/mailman/listinfo/nord-modular Members: use http://mail.electro-music.com/mailman/options/nord-modular to change subscription status, digest options, password, topics, etc. Patches sent to the Nord-Modular mailing list may not be redistributed without the express consent of the author/creator. ___________________________________________________________ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070713/3150cb7b/attachment-0002.html From matfhew.carpenfer at gmail.com Fri Jul 13 12:07:20 2007 From: matfhew.carpenfer at gmail.com (matthew carpenter) Date: Fri, 13 Jul 2007 15:07:20 -0400 Subject: [NM] Please help me to edit my NM1 In-Reply-To: <002001c7c577$2c59c810$d73b7b52@allez> References: <908a4c120707130951v11462bcfo114008e959780d38@mail.gmail.com> <534d0e850707130955x9b49b82l651ca3bcc0c4b117@mail.gmail.com> <002001c7c577$2c59c810$d73b7b52@allez> Message-ID: <534d0e850707131207v77ddc604ufb6c4f8167373d18@mail.gmail.com> Glad to help! Patch on! On 7/13/07, m.sulmona wrote: > > Fantastic... > I had the same problem and was too ashamed to ask... > > THANX A LOT !!!! > > ----- Original Message ----- > *From:* matthew carpenter > *To:* Nord Modular mailing list > *Sent:* Friday, July 13, 2007 6:55 PM > *Subject:* Re: [NM] Please help me to edit my NM1 > > It's really easy. Right-click the shortcut to the NM Editor and go to the > Compatibility tab and set the compatibility to Windows 98 and click OK. > Should work then. This comes up ALL the time. > > On 7/13/07, Amos wrote: > > > > Hello, > > > > I have owned a NM1 rack for some time, but I have never been able to get > > the editor to recognize it. I use winXP (SP2) which I gather is not very > > good at running the Nord Modular editor 3.03 from Clavia. I have tried > > the open source editor just today and it does connect to the Nord, but I > > gather that not all modules are supported by the open-source editor. This > > is very frustrating! Does anyone have some suggestions about compatibility > > settings or other technomagic I could try to get the official editor to > > work? I am aching to program this synth... also, if anyone with experience > > in using the open-source editor could tell me precisely what it is missing > > and how much of a problem that is for creating patches, I am very curious to > > know more. Thank you very much! > > > > -Amos > > > > ___________________________________________________________ > > Nord-modular mailing list > > Nord-modular at electro-music.com > > http://mail.electro-music.com/mailman/listinfo/nord-modular > > > > Members: use http://mail.electro-music.com/mailman/options/nord-modular > > to change subscription status, digest options, password, topics, etc. > > > > Patches sent to the Nord-Modular mailing list may not be redistributed > > without the express consent of the author/creator. > > ___________________________________________________________ > > > > > ------------------------------ > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord-modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ > > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord-modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070713/77a51fcd/attachment-0002.html From blommoo at wanadoo.nl Fri Jul 13 23:30:18 2007 From: blommoo at wanadoo.nl (Wm Blommers) Date: Sat, 14 Jul 2007 08:30:18 +0200 (CEST) Subject: [NM] Please help me to edit my NM1 Message-ID: <26235846.2765061184394618830.JavaMail.www@wwinf6001> #???????????Z?????,???w??f????n??????L???j??j?"r?^???hP??i???j?!???zW???&???r???] ??L???j????@C???????Z??'3 j?Zr?????+???uDK??i????W?y?k?k???(??b???j)?????n???j?Zr?????M;??w???????????!?????? From matfhew.carpenfer at gmail.com Sat Jul 14 09:13:28 2007 From: matfhew.carpenfer at gmail.com (matthew carpenter) Date: Sat, 14 Jul 2007 12:13:28 -0400 Subject: [NM] NM: 12 kHz Elliptical Filter Message-ID: <534d0e850707140913t6368342bw53cfa710e08f94a5@mail.gmail.com> Dave (Peck), Would you or anyone else with this .pch mind posting it to the list, again? I receive a File Not Found error when attempting to download it from the message in the list archives and I can't find it in the Patch archives. This is the patch that removes the 12 kHz hash in some NM Classic patches and can 'warm' the sound. Thanks! Matt -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070714/69f45ded/attachment-0002.html From j.punter at iaf.nl Sat Jul 14 12:23:57 2007 From: j.punter at iaf.nl (Jan Punter) Date: Sat, 14 Jul 2007 21:23:57 +0200 Subject: [NM] NM: 12 kHz Elliptical Filter In-Reply-To: <534d0e850707140913t6368342bw53cfa710e08f94a5@mail.gmail.com> References: <534d0e850707140913t6368342bw53cfa710e08f94a5@mail.gmail.com> Message-ID: <1184441037.469922cdc223a@webmail.iaf.nl> Quoting matthew carpenter : > Would you or anyone else with this .pch mind posting it to the list, again? Do you know the name of the patch and/or who made it? -- Jan. From matfhew.carpenfer at gmail.com Sat Jul 14 12:37:17 2007 From: matfhew.carpenfer at gmail.com (matthew carpenter) Date: Sat, 14 Jul 2007 15:37:17 -0400 Subject: [NM] NM: 12 kHz Elliptical Filter In-Reply-To: <1184441037.469922cdc223a@webmail.iaf.nl> References: <534d0e850707140913t6368342bw53cfa710e08f94a5@mail.gmail.com> <1184441037.469922cdc223a@webmail.iaf.nl> Message-ID: <534d0e850707141237x1f246084p3901f0d280ad58f2@mail.gmail.com> Yes, Dave Peck made it and it was called Warmth something. The message was posted in late June, 2005. On 7/14/07, Jan Punter wrote: > > Quoting matthew carpenter : > > > Would you or anyone else with this .pch mind posting it to the list, > again? > > Do you know the name of the patch and/or who made it? > > -- > Jan. > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord-modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070714/abea59a8/attachment-0002.html From j.punter at iaf.nl Sat Jul 14 12:49:28 2007 From: j.punter at iaf.nl (Jan Punter) Date: Sat, 14 Jul 2007 21:49:28 +0200 Subject: [NM] NM: 12 kHz Elliptical Filter In-Reply-To: <534d0e850707141237x1f246084p3901f0d280ad58f2@mail.gmail.com> References: <534d0e850707140913t6368342bw53cfa710e08f94a5@mail.gmail.com> <1184441037.469922cdc223a@webmail.iaf.nl> <534d0e850707141237x1f246084p3901f0d280ad58f2@mail.gmail.com> Message-ID: <1184442568.469928c80727d@webmail.iaf.nl> Quoting matthew carpenter : > Yes, Dave Peck made it and it was called Warmth something. The message was > posted in late June, 2005. I have "Warmth examples" made by Dave, but it's dated 2003-06-24, I'll attach it so you can have a look. It does have an elliptical filter in the left column. I've got another patch made by Dave called "warmth Idea", but that one has no elliptical filter. -- Jan. -------------- next part -------------- A non-text attachment was scrubbed... Name: warmth examples.pch Type: application/nord-modular-patch Size: 1976 bytes Desc: not available Url : http://mail.electro-music.com/pipermail/nord-modular/attachments/20070714/3041ccfe/attachment-0002.bin From matfhew.carpenfer at gmail.com Sat Jul 14 12:55:29 2007 From: matfhew.carpenfer at gmail.com (matthew carpenter) Date: Sat, 14 Jul 2007 15:55:29 -0400 Subject: [NM] NM: 12 kHz Elliptical Filter In-Reply-To: <1184442568.469928c80727d@webmail.iaf.nl> References: <534d0e850707140913t6368342bw53cfa710e08f94a5@mail.gmail.com> <1184441037.469922cdc223a@webmail.iaf.nl> <534d0e850707141237x1f246084p3901f0d280ad58f2@mail.gmail.com> <1184442568.469928c80727d@webmail.iaf.nl> Message-ID: <534d0e850707141255x2d75a866o71b4f6fa080699bd@mail.gmail.com> Thanks, Jan! Here's the original post from Dave: Warmth Filter Template .pch and .pch2 http://mail.electro-music.com/pipermail/nord-modular/2005-July/003023.html Note the attachments that are missing. Matt On 7/14/07, Jan Punter wrote: > > Quoting matthew carpenter : > > > Yes, Dave Peck made it and it was called Warmth something. The message > was > > posted in late June, 2005. > > I have "Warmth examples" made by Dave, but it's dated 2003-06-24, I'll > attach > it > so you can have a look. It does have an elliptical filter in the left > column. > I've got another patch made by Dave called "warmth Idea", but that one has > no > elliptical filter. > > > -- > Jan. > > ___________________________________________________________ > Nord-modular mailing list > Nord-modular at electro-music.com > http://mail.electro-music.com/mailman/listinfo/nord-modular > > Members: use http://mail.electro-music.com/mailman/options/nord-modular > to change subscription status, digest options, password, topics, etc. > > Patches sent to the Nord-Modular mailing list may not be redistributed > without the express consent of the author/creator. > ___________________________________________________________ > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070714/21db36cc/attachment-0002.html From matfhew.carpenfer at gmail.com Sat Jul 14 12:56:33 2007 From: matfhew.carpenfer at gmail.com (matthew carpenter) Date: Sat, 14 Jul 2007 15:56:33 -0400 Subject: [NM] NM: 12 kHz Elliptical Filter In-Reply-To: <534d0e850707141255x2d75a866o71b4f6fa080699bd@mail.gmail.com> References: <534d0e850707140913t6368342bw53cfa710e08f94a5@mail.gmail.com> <1184441037.469922cdc223a@webmail.iaf.nl> <534d0e850707141237x1f246084p3901f0d280ad58f2@mail.gmail.com> <1184442568.469928c80727d@webmail.iaf.nl> <534d0e850707141255x2d75a866o71b4f6fa080699bd@mail.gmail.com> Message-ID: <534d0e850707141256w31ea4bf0ia14df327a32a884f@mail.gmail.com> Yep, this is the one! On 7/14/07, matthew carpenter wrote: > > Thanks, Jan! > Here's the original post from Dave: > > Warmth Filter Template .pch and .pch2 > > http://mail.electro-music.com/pipermail/nord-modular/2005-July/003023.html > > > Note the attachments that are missing. > > Matt > > On 7/14/07, Jan Punter wrote: > > > > Quoting matthew carpenter : > > > > > Yes, Dave Peck made it and it was called Warmth something. The message > > was > > > posted in late June, 2005. > > > > I have "Warmth examples" made by Dave, but it's dated 2003-06-24, I'll > > attach > > it > > so you can have a look. It does have an elliptical filter in the left > > column. > > I've got another patch made by Dave called "warmth Idea", but that one > > has no > > elliptical filter. > > > > > > -- > > Jan. > > > > ___________________________________________________________ > > Nord-modular mailing list > > Nord-modular at electro-music.com > > http://mail.electro-music.com/mailman/listinfo/nord-modular > > > > Members: use http://mail.electro-music.com/mailman/options/nord-modular > > to change subscription status, digest options, password, topics, etc. > > > > Patches sent to the Nord-Modular mailing list may not be redistributed > > without the express consent of the author/creator. > > ___________________________________________________________ > > > > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.electro-music.com/pipermail/nord-modular/attachments/20070714/7900188b/attachment-0002.html From j.punter at iaf.nl Sat Jul 14 13:03:24 2007 From: j.punter at iaf.nl (Jan Punter) Date: Sat, 14 Jul 2007 22:03:24 +0200 Subject: [NM] NM: 12 kHz Elliptical Filter In-Reply-To: <534d0e850707141255x2d75a866o71b4f6fa080699bd@mail.gmail.com> References: <534d0e850707140913t6368342bw53cfa710e08f94a5@mail.gmail.com> <1184441037.469922cdc223a@webmail.iaf.nl> <534d0e850707141237x1f246084p3901f0d280ad58f2@mail.gmail.com> <1184442568.469928c80727d@webmail.iaf.nl> <534d0e850707141255x2d75a866o71b4f6fa080699bd@mail.gmail.com> Message-ID: <1184443404.46992c0c69306@webmail.iaf.nl> Quoting matthew carpenter : > Thanks, Jan! You're welcome Matt. > Here's the original post from Dave: I checked, but don't have the patch mentioned in Dave's post, I do believe though (from reading Dave's description) that the patch I just posted uses the same filter. > Note the attachments that are missing. Yes, all attachments are missing in the mail archive. I don't know if this is a bug or intention. Howard are you out there? -- Jan. From davepnord at sbcglobal.net Sat Jul 14 16:30:02 2007 From: davepnord at sbcglobal.net (davepnord Peck) Date: Sat, 14 Jul 2007 16:30:02 -0700 (PDT) Subject: [NM] NM: 12 kHz Elliptical Filter In-Reply-To: <534d0e850707141256w31ea4bf0ia14df327a32a884f@mail.gmail.com> Message-ID: <583132.63160.qm@web81009.mail.mud.yahoo.com> Hi Mathew & all, First, to give credit where credit is due, the NM1 12kHz elliptical warmth filter is Rob H's creation. The G2 patch called "Warmth Filter TemplateG2" was my attempt at a direct NM-to-G2 translation of that filter for the G2. These are the two patches described in the post titled "NM Tilt Test (and psychoacoustics)". However, since that time, Rob has come up with several more warmimg filters for the G2 that work better than the 12k notch variety (for the G2, not for the NM1). These are generally described as 'tilt' filters, since they tilt the entire 20Hz-20kHz audio spectrum (gently boosting the bass end and gently rolling off the treble. This is a different effect than the notch filters which supress a narrow band of high frequency harshness. I'm attaching the original NM1 12kHz eliptical warmth filter template to this email and I'm also attaching a few G2 warmth filters - my direct translation for the G2 (a notch), and a couple of Rob's TILT filters. Please note - I have found that sometimes the G2 tilt filter with the dual multimode filters in it can have unexpected behavior when you copy & paste it into a patch, and it seems to depend on what other modules are in the patch. If you paste it into a patch that also has the "FltNord" 12/24dB filter in it, the tilt filter may malfunction. It will still have some effect, but it will let a lot of very high frequency stuff still pass through. If you copy and paste it into the patch AGAIN, while the first one is still there and move the patch cords from the first one to the second one and THEN delete the first one, it will sometimes fix it. You may have to try deleting modules from the first (unpatched) tilt filter one at a time to find the offending module. Dave Peck --- matthew carpenter wrote: > Yep, this is the one! > > On 7/14/07, matthew carpenter > wrote: > > > > Thanks, Jan! > > Here's the original post from Dave: > > > > Warmth Filter Template .pch and .pch2 > > > > > http://mail.electro-music.com/pipermail/nord-modular/2005-July/003023.html > > > > > > Note the attachments that are missing. > > > > Matt > > > > On 7/14/07, Jan Punter wrote: > > > > > > Quoting matthew carpenter > : > > > -------------- next part -------------- A non-text attachment was scrubbed... Name: Warmth Filter Template.pch Type: application/octet-stream Size: 1363 bytes Desc: 664311915-Warmth Filter Template.pch Url : http://mail.electro-music.com/pipermail/nord-modular/attachments/20070714/712906f1/attachment-0008.obj -------------- next part -------------- A non-text attachment was scrubbed... Name: spectrumtiltfilter2.pch2 Type: application/octet-stream Size: 1671 bytes Desc: 425122474-spectrumtiltfilter2.pch2 Url : http://mail.electro-music.com/pipermail/nord-modular/attachments/20070714/712906f1/attachment-0009.obj -------------- next part -------------- A non-text attachment was scrubbed... Name: spectrumtiltfilter.pch2 Type: application/octet-stream Size: 1612 bytes Desc: 3676945573-spectrumtiltfilter.pch2 Url : http://mail.electro-music.com/pipermail/nord-modular/attachments/20070714/712906f1/attachment-0010.obj -------------- next part -------------- A non-text attachment was scrubbed... Name: Warmth Filter TemplateG2.pch2 Type: application/octet-stream Size: 1542 bytes Desc: 1209124832-Warmth Filter TemplateG2.pch2 Url : http://mail.electro-music.com/pipermail/nord-modular/attachments/20070714/712906f1/attachment-0011.obj From matfhew.carpenfer at gmail.com Tue Jul 24 10:28:51 2007 From: matfhew.carpenfer at gmail.com (cebec) Date: Tue, 24 Jul 2007 10:28:51 -0700 (PDT) Subject: [NM] FS: Nord Micro Modular Message-ID: <11768054.post@talk.nabble.com> Excellent, clean condition. Includes AC adapter and manual. $375 shipped via Priority with insurance. PayPal preferred. Just picked up a Rack so don't need this. Still looking for a G2 Engine. Thanks! -- View this message in context: http://www.nabble.com/FS%3A-Nord-Micro-Modular-tf4137489.html#a11768054 Sent from the Nord - Modular mailing list archive at Nabble.com. From Synapse2k at comcast.net Tue Jul 24 11:02:40 2007 From: Synapse2k at comcast.net (Synapse) Date: Tue, 24 Jul 2007 11:02:40 -0700 Subject: [NM] [G2] FS: G2 Keyboard Unexpanded Message-ID: <1564228002.20070724110240@comcast.net> I'm selling my unaxpended G2 keyboard on E-bay, to make space. I plan to buy a G2 Engine to replace it. $1300 Buy It Now with free shipping anywhere in the U.S. I included pictures. Check it out! http://cgi.ebay.com/Clavia-Nord-Modular-G2-Keyboard_W0QQitemZ260142502833QQihZ016QQcategoryZ38071QQssPageNameZWDVWQQrdZ1QQcmdZViewItem From tommi.lindell at welho.com Wed Jul 25 01:06:48 2007 From: tommi.lindell at welho.com (Tommi Lindell) Date: Wed, 25 Jul 2007 11:06:48 +0300 Subject: [NM] G2 rental in London ? In-Reply-To: <1564228002.20070724110240@comcast.net> References: <1564228002.20070724110240@comcast.net> Message-ID: Hi ! I'm going to play in a radio session at BBC August 27-28 with Finnish group Pepe Deluxe. It looks like the organizers can't find a G2X that I could use there. So I'd like to ask if there's anyone here from the London area who could rent his / hers G2X (or at least G2) for those sessions ? (I could take my own G2X, but it would be quite expensive with a proper flightcase etc.) So if anyone can help me on this, please email me privately: tommi.lindell at welho.com Thanks, Tommi From rasmus at nuovoinizio.se Thu Jul 26 11:43:16 2007 From: rasmus at nuovoinizio.se (=?ISO-8859-1?Q?Rasmus_Ny=E5ker?=) Date: Thu, 26 Jul 2007 20:43:16 +0200 Subject: [NM] [G2] Very simple wavetable patch In-Reply-To: References: <1564228002.20070724110240@comcast.net> Message-ID: First post here... I am not on level with some of you yet, but I am getting seriously attached to my G2 since I got it some months ago. Had a slow day at work today so I wrote down a few patch experiments on paper. The first one I tried when I got home was a simple wavetable synth. I tried to make it as easy as possible to understand. So there should be no problem for anyone here. There are 8 digital style single cycle waveforms (7-bit & 16-steps) based on eight sequencers to make it easy to draw waveforms. There are an oscillator controlling the stepping and one controlling the resetting (pitch up the later to reduce the number of steps per cycle without having to change it on every sequencer). I put it into a simple architecture and made the wavetabling controllable from LFO, envelope or/and manually. To round of the edges as it change in the middle of waveforms you have a X-fade to smooth it off. Hope you can get some interesting results with it! Now I got to start on some more interesting waveshaping experiments... Cheers Rasmus A. Ny?ker PS. You can easily change the patch into a 128 step single cycle handdrawn wavefo